Troy-Bilt Lawn Mower Parts

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

This genuine Tecumseh replacement part is a brake pad for use with lawn tractors and riding lawn mowers. A properly functioning brake pad is essential for the safe and reliable use of a lawn tractor or riding mower. When the brake pedal is pushed, the brake pad applies pressure to the brake disc to stop the lawn tractor or mower from moving. Brake pads may become worn out or damaged with extended use, necessitating replacement. Remember to check the brake pad periodically to spot any wear or damage. This part is an identical replacement for a brake pad that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A nut driver, wrench set, floor jack, and socket set are required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold as a pair. This part is compatible with a variety of Craftsman, Troy-Bilt, and more lawn tractors and riding mowers. Please note: original part numbers TC-799021A and 790006A are now obsolete, and manufacturer has replaced the original part numbers with this part.

The float shaft and pin are a genuine replacement for select Tecumseh carburetors on small lawn and garden equipment engines. The float shaft and pin are responsible for maintaining the fuel level within the carburetor. Over time because of repetitive motion, the float pin and shaft can break or become damaged, which will stop the carburetor from functioning properly. If the carburetor cannot function, the engine will not be able to perform. If left unattended, the engine and carburetor could fail completely or bigger issues could occur. Replacing the float is essential to getting the equipment back in order. This genuine float shaft and pin is designed for use on machines from Tecumseh, Poulan, Husqvarna, Lawn Boy, Cub Cadet, MTD, and Craftsman, and is compatible with a number of models. The fuel system should be drained and the engine should be cool before any engine repairs are started. Always wear gloves for hand protection. This float shaft and pin are made of durable materials and sold as a unit. No additional hardware or parts are included.

This is an intake manifold gasket used primarily in lawnmowers and wood chippers with small engines. The intake manifold gasket sits between the carburetor and the intake manifold. It offers an air-tight seal that ensures the carburetor runs at peak performance levels. The gasket is made from compound material and is durable, but through time and use, the part can wear and break down, which necessitates replacement.Some symptoms of a worn-out intake manifold gasket are engine misfiring, decrease engine power, leaks, and engine overheating. In some cases, the gasket will also break and need to be replaced before the lawn equipment is used. Installing a new intake gasket requires a wrench. Make sure the equipment is turned off and placed on a sturdy surface. Remove the spark plug wire before taking off the carburetor. Next, the manifold gasket can be removed before placing a new component and reassembling additional parts.This intake manifold gasket is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The gasket can be used with lawnmowers and wood chippers manufactured by Craftsman, Lawn-Boy, MTD, Tecumseh, and Toro.

A dipstick is a part that is used to measure the amount of oil in various yard and garden equipment. It allows a person to reach an otherwise inaccessible space by inserting and then removing the dipstick. At that point, checking how much of the dipstick is covered in oil will let a person know whether it needs to be topped off. Over time, these tools can rust, break, or crack and will need to be replaced.Take a look at the dipstick for any damage before making a replacement of the part. If it needs to be replaced, it should be done while the lawnmower or other tool is cooled down. Unscrew the broken or damaged dipstick and take it out of the oil tank. Simply insert the new dipstick and screw it on before checking the oil level and using the machine again.This dipstick is a replacement part for Tecumseh, Cub Cadet, Toro, Briggs & Stratton, Troy-Bilt, Lawn-Boy, and Craftsman lawnmowers, wood chippers, and pressure washers. It comes as an individual component. It is a genuine OEM product that is sourced directly from the manufacturer.

This is a genuine cylinder head bolt replacement designed for use on select small engines found in outdoor power equipment. The cylinder head bolt is responsible for securing the cylinder head in the engine. It is exposed to constant vibrations and high pressure, which can lead to eventual wear and damage. These bolts will need to be replaced immediately if they become damaged or broken. If the bolts are not replaced, the cylinder head will not be secure and that could cause further engine damage or total failure. This genuine OEM replacement bolt is manufactured by Tecumseh and designed for use in engines in a number of its small outdoor power machines. This part is compatible with dozens of engines and the exact number of bolts and placement may vary based on the model. The parts diagram should provide information on the application and location of this part. This bolt is sold as an individual unit, and those who need more than one will have to order multiple quantities. Always wear gloves for hand protection and allow the engine to cool before performing any engine repairs. This replacement bolt requires a hex socket or screwdriver.

Carburetors must have tight seals to prevent too much air from getting into the carburetor at one time. If there are issues with a welch plug, it could cause an engine to lose power or to run rough. The plug might have lost its seal, it could have cracked, or it could have become lost. Sometimes, the vibration of the engine is enough to cause a plug to fall out if it is not tightly sealed. A loose fit will cause problems with the flow of fuel. This genuine OEM welch plug is sold individually and can help to seal your carburetor so your engine retains power. The part can be used with a range of lawn tractors, lawnmowers, snowblowers, and small engines. Compatible brands include Tecumseh, Lawn-Boy, Toro, Craftsman, and MTD.