Parts for Maytag MAH2400AWW: 01 - Cabinet Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Size: 8 x 1/2 ab.

This dispenser hose routes water from the refrigerator's valve to the dispenser and ice maker, helping restore proper water delivery and prevent leaks or drips at the dispenser. Use as a direct replacement for damaged or leaking lines. What it does:

• Carries water from the inlet valve to the dispenser and ice system
• Replaces cracked, split, or kinked tubing that causes leaks
• Can resolve weak or intermittent dispenser flow caused by restricted or collapsed hose
• Helps prevent water damage by restoring a sealed, secure connection

• Shut off the refrigerator's water supply and disconnect power before starting
• Inspect fittings and clamps; replace any corroded or damaged hardware
• Route hose without sharp bends or kinks and secure with proper clamps
• Turn water back on and check all connections for leaks before restoring normal use

This dispenser hose routes water from the refrigerator's valve to the dispenser and ice maker, helping restore proper water delivery and prevent leaks or drips at the dispenser. Use as a direct replacement for damaged or leaking lines. What it does:

• Carries water from the inlet valve to the dispenser and ice system
• Replaces cracked, split, or kinked tubing that causes leaks
• Can resolve weak or intermittent dispenser flow caused by restricted or collapsed hose
• Helps prevent water damage by restoring a sealed, secure connection

• Shut off the refrigerator's water supply and disconnect power before starting
• Inspect fittings and clamps; replace any corroded or damaged hardware
• Route hose without sharp bends or kinks and secure with proper clamps
• Turn water back on and check all connections for leaks before restoring normal use

This cold water inlet valve is the solenoid-operated valve that opens to let cold water into your washer during fill and closes to stop flow. Replacing it restores proper fill speed and helps prevent off-cycle drips.

• Regulates cold-side water flow into the washer during fill and rinse cycles
• Opens when energized by the control; closes to stop water between cycles
• Common signs of failure: no cold fill, slow fill, or dripping into the tub
• May trigger fill/temperature errors or cause a loud hum with little/no water flow

• Disconnect power and shut off the household water supply before servicing
• Place a towel or pan to catch residual water and relieve line pressure
• Label and transfer hoses and wire connectors one-for-one to the new valve
• Inspect/clean inlet screens and flush lines; check for leaks after a test fill

This is the hot water inlet valve for compatible laundry appliances. It controls the flow of hot water into the machine during fill cycles, helping ensure proper washing performance and accurate temperature mixing.

• Opens and closes to allow hot water into the tub when energized
• A failed valve can cause no hot fill, slow filling, incorrect water temperature, or leaks from the valve body
• Also lead to error codes related to water fill or extended fill times

• Disconnect power and turn off both water supplies before servicing
• Have a towel/contained pan ready for residual water in hoses
• Note hose orientation and electrical connector position before removal
• Inspect and replace inlet screen washers or hoses if restricted or worn

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

A hex head mounting bolt used to fasten appliance components securely. This genuine-design replacement restores proper fit where a standard hex bolt is required for panels, brackets, or assembly points. What it does

• Secures panels, brackets, or assemblies to maintain safe, stable appliance operation
• Stops rattling or misalignment caused by a missing or damaged bolt
• Restores factory-fit connections after repairs or part replacements
• Matches OEM fit and fastening function for reliable reassembly

• One hex head mounting bolt

• Disconnect power and gas before accessing internal parts
• Use the correct socket or wrench size to avoid rounding the head
• Tighten to snug fit; do not overtighten to prevent stripping threads
• Replace with the same type and size bolt; if threads are damaged, repair or replace the mating component

This drain pump assembly removes wastewater from the washer during the drain and spin portions of the cycle. Replacing a weak or failed pump helps the washer finish cycles without standing water, odors, or error interruptions.

• Pumps water from the tub to the household drain during drain/spin
• Wet clothes at cycle end, or humming/grinding noises from the pump area
• Leaking around the pump or connections can indicate a cracked housing

• Disconnect power and shut off water supply before servicing
• Expect some water release; place towels or a shallow pan under the pump
• Transfer wires and hoses to the new pump in the same orientation; reuse existing clamps
• Inspect hoses/filters for obstructions and run a quick drain test to check for leaks

This water level pressure sensor switch assembly senses the washer's water level and signals the control so the machine fills and stops at the correct level. Replaces a worn or faulty pressure sensor to restore proper fill control. What it does:

• Detects water level via the air chamber and sends the corresponding signal to the machine control.
• Stops overfilling or underfilling when functioning correctly.
• Commonly linked to symptoms such as continuous filling, no fill, incorrect water level, or the cycle not advancing.
• Works as the interface between the tub water level and the electronic control board.

• Disconnect power and shut off water supply before starting any repair.
• Relieve any residual water/pressure and note hose routing before removal.
• Handle the air hose and electrical connector carefully; ensure tight, leak-free connections on reassembly.
• After installation, run a test cycle to ensure correct water-level sensing and operation.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.