Parts for Gaggenau VG353-112: 02 - Body & Burner Assemblies Parts

This burner holder stabilizes and positions a gas cooktop burner for consistent flame control and safe operation. It keeps the burner cap aligned and supports reliable ignition and even heating across the cooktop surface. What it does:

• Secures the burner cap and burner head to prevent wobbling or misalignment
• Helps maintain a steady, centered flame for even cooking
• Reduces burner movement that can cause ignition issues or uneven heating
• Useful when a burner is loose, off-center, or the cap won't seat correctly

• Turn off gas supply and power to the appliance before starting any work
• Remove grates and burner caps; inspect fit and orientation before replacing
• Typically installs without complex tools, but keep hardware and mounting positions in mind
• If you smell gas or suspect a leak after installation, stop.

This connecting part links and secures internal dishwasher components to maintain proper alignment and operation. It replaces a worn or broken connector to restore stable connections and reduce movement-related noise or malfunction. What it does:

• Secures adjoining parts or assemblies to prevent shifting during operation
• Restores proper alignment that can affect door fit, water distribution, or mechanical engagement
• Can eliminate rattling or intermittent contact caused by a damaged connector
• Used where a small molded connector or clip is required for assembly stability

• One connecting part

• Disconnect power and water before starting any repair
• Basic hand tools typically required; handle small plastic parts carefully to avoid damage
• Verify correct orientation and secure fit against mating surfaces during installation

This M8 x 1 machine screw secures the switch assembly on compatible Bosch appliances, keeping electrical and mechanical connections stable for reliable operation. Use it when a mounting screw is missing, stripped, or damaged. What it does:

• Secures the appliance switch or switch bracket to the chassis
• Keeps electrical contacts aligned to prevent intermittent operation
• Prevents vibration-related loosening or rattling of the switch
• Restores proper mounting after stripped or corroded fasteners

• One M8 x 1 screw

• Disconnect power before servicing to avoid shock or damage
• Use the correct driver and align screw straight to avoid cross-threading
• Tighten securely but do not overtighten; avoid damaging threads or switch housing
• If threads are damaged, replace the mating nut or insert before reuse

This support spacer helps position and stabilize internal components, restoring proper alignment and reducing strain on surrounding parts. It's a small replacement piece that prevents shifting and maintains correct component spacing. What it does:

• Supports and spaces internal parts to maintain correct alignment and fit
• Reduces movement that can cause rubbing, noise, or premature wear
• Helps keep assemblies seated evenly to prevent binding or misalignment
• Used where precise clearance is required between parts or panels

• Disconnect power before servicing to avoid shock or injury
• Handle surrounding panels and components carefully to avoid damage
• Basic hand tools are typically required; follow for proper access
• Correct orientation and seating before reassembling panels

This is a replacement electrical door-latch switch that completes the circuit when the appliance door is closed, restoring normal control and operation. It replaces a failed switch to help the unit register a closed door and allow cycles to start. What it does:

• Detects/communicates door-closed status to the control so cycles can begin
• Acts as an electrical contact/signal switch for safety interlock systems
• Commonly used when the appliance won't start, stalls at door-close, or shows control/lock errors
• Restores reliable on/off/contact function for the door latch circuit

• One replacement switch as pictured and specified

• Disconnect power before accessing the door latch area; follow manufacturer safety procedures
• Verify correct part fit and orientation before final assembly
• Test switch continuity with a multimeter after removal and before final reassembly

This terminal connector provides a secure electrical connection for appliance wiring, replacing a worn or damaged spade-style terminal to restore reliable power flow. It fits into the appliance's existing terminal block for a lasting repair. What it does:

• Replaces a damaged or corroded spade terminal to re-establish a solid electrical connection
• Helps eliminate intermittent power, arcing, or overheating at the wiring junction
• Works where a right-angle terminal is required to connect a wire to the appliance terminal block
• Compatible with standard insulated or non-insulated spade-style wire terminations

• Disconnect power at the circuit breaker or unplug the appliance before inspecting or replacing terminals
• Verify terminal orientation and fully seat the connector on the mating spade to ensure a tight fit
• Use proper crimping or soldering techniques if attaching bare wire; avoid loose or exposed conductors

This replacement ground wire provides a secure electrical ground connection to help reduce the risk of shorts and electrical faults. It restores proper chassis grounding for safe appliance operation. What it does:

• Connects appliance chassis or component to earth ground to help prevent electric shock and reduce electrical noise
• Restores continuity when an original ground wire is damaged, corroded, or broken
• Addresses symptoms such as intermittent power, tripped breakers, arcing at terminals, or visible wire damage
• Used wherever a factory ground lead is required to complete the appliance grounding circuit

• One replacement ground wire

• Always disconnect power at the breaker or unplug the appliance before inspecting or replacing wiring
• Verify proper terminal locations and orientation against the appliance wiring diagram before installation
• Use insulated tools and replace any mounting hardware or ring terminals that are damaged or corroded

This adhesive ground terminal label identifies the appliance's designated grounding connection, helping homeowners locate the correct terminal quickly for safe wiring and service. Durable, self-adhesive marking for internal appliance panels. What it does:

• Marks the chassis ground/earth connection so the grounding point is clearly visible
• Helps reduce wiring errors during service or installation
• Improves safety by making the ground terminal easy to find
• Intended for use on interior appliance sheet metal or electrical access panels

• Disconnect power before opening access panels or working near electrical components
• Clean and dry the mounting surface; peel adhesive backing and press firmly into place
• Position carefully before applying; adhesive is permanent and not intended for repeated repositioning
• Use only on appropriate interior panel surfaces away from high-heat components

This thermocouple is the flame-sensing safety sensor used on gas ovens and ranges to detect a pilot or burner flame and allow the gas valve to stay open. It replaces a worn or failed sensor to restore proper flame detection. What it does:

• Senses pilot/burner flame and signals the gas valve to remain open when heated
• Prevents gas flow if the flame goes out, improving appliance safety
• Commonly replaces thermocouples that are bent, corroded, or no longer reach operating temperature
• Can resolve symptoms like burners or oven not staying lit, or intermittent ignition

• Disconnect power and shut off the gas supply before starting work
• Handle the sensor tip and tube gently; avoid kinking or over-bending the probe
• Verify proper seating and secure connection to the gas valve and pilot assembly

Spring for knob that restores proper tension and return action to a control knob, helping knobs operate smoothly and stay in position. Use this small replacement when a knob feels loose, won't center, or won't return. What it does:

• Provides tension and return action for a control knob so it centers and responds correctly.
• Replaces worn or broken knob springs that cause loose, wobbly, or non-returning knobs.
• Works as the mechanical spring behind the knob's rotation and detent action.
• Small, straightforward part used wherever a control knob needs restored tension.

• Disconnect power to the appliance (unplug or switch off circuit breaker) before servicing.
• Remove the knob and any bezels per the appliance's service instructions to access the spring.
• Handle small parts carefully; keep orientation noted for correct reassembly.

This white control knob replaces a worn, faded, or damaged front-panel control on compatible cooktop or range controls to restore a secure grip and clear pointer for selecting settings. It provides a direct, intuitive interface for adjusting heat and function. What it does:

• Replaces a cracked, loose, or missing control knob so you can safely select temperatures and functions.
• Restores the visual pointer and tactile feel for precise setting changes.
• Fits onto the appliance's control shaft to transmit user input to the underlying switch or valve.
• Helps prevent accidental setting changes caused by brittle or broken knobs.

• Disconnect power (and gas, if applicable) before servicing controls to avoid injury.
• Most knobs are press-fit—pull the old knob straight off the control shaft and push the replacement fully onto the shaft.
• Verify the shaft spline type and knob orientation before ordering to ensure proper fit; special adapters or variants may be required on some models.

This conversion orifice kit supplies the correct burner orifices needed to convert a compatible gas appliance to natural gas, restoring proper burner flow and safe combustion for appliances set up for NAT gas service. What it does:

• Replaces factory orifices to set correct natural-gas flow to burners
• Helps restore full, even flames when orifices are worn or incorrect
• Used during fuel-type conversion from LP to natural gas (or vice versa when using the correct kit)
• Prevents weak or uneven burner performance caused by wrong or damaged orifices

• Turn off gas supply and disconnect power before service; follow all local codes
• Installation should be performed by a knowledgeable DIYer following the OEM conversion instructions
• Verify correct orifice sizes and settings per the appliance's conversion instructions before operating
• After installation, check all fittings for leaks and confirm burners light and operate correctly