Parts for Gaggenau AH360-720/01: 02 - Body Parts

This part has been discontinued and is no longer available.

This part has been discontinued and is no longer available.

This part has been discontinued and is no longer available.

This part has been discontinued and is no longer available.

This halogen oven light replaces a burned or dim interior cooking lamp so you can clearly see inside the oven while cooking. It restores interior illumination with the same fit and function as the original lamp. What it does

• Replaces a failed or flickering oven interior lamp
• Restores bright, focused halogen illumination for better visibility while checking food
• Helps diagnose lighting issues by eliminating the bulb as the cause of a dark oven
• Matches common oven lamp sockets for direct replaceability

• Allow the oven to fully cool and disconnect power before accessing the light
• Use a cloth or gloves when handling the bulb to avoid skin oils on the glass
• Remove the light cover per your oven's instructions before replacing the bulb

This metal dishwasher filter captures food particles and helps protect the motor and drain system for more reliable washing. Durable metal construction resists wear and clamps into the dishwasher sump to trap debris before it reaches the pump. What it does:

• Screens and traps food particles and debris to prevent clogs in the drain and pump
• Helps maintain wash performance by keeping recirculation paths clear
• Durable metal mesh resists damage from normal use and cleaning
• Fits into the dishwasher sump area and works with the existing filter assembly

• High-level swap: remove the lower rack, lift out the old filter assembly, and seat the replacement filter into the sump per factory alignment
• Clean surrounding area and inspect for additional debris before installing the new filter
• No special tools typically required; hand-tighten any retaining features—do not force
• Disconnect power and follow manufacturer safety instructions before servicing

This electronic operating module controls the appliance's functions and user interface, restoring proper cycle selection and timing when the control electronics fail. Replaces a faulty control board to get the appliance responding and running correctly. What it does:

• Manages cycle selection, timing, and user commands for the appliance's electronic control system
• Processes inputs from buttons, dials, and sensors so selected functions run as intended
• Can resolve symptoms such as unresponsive controls, incorrect cycles, or appliances that won't start
• Works with the appliance's display and relays to trigger heaters, pumps, and motors when commanded

• One operating module (control board) as shown

• Disconnect power (unplug or switch off circuit breaker) before beginning any work
• Handle the board by the edges and avoid touching connector pins or circuitry
• Verify connectors and wiring harnesses are fully seated; match connector locations before reassembly

This selector switch module is the electromechanical control that lets your appliance register and change user-selected cycle settings. Replacing a worn switch restores reliable selection and communication between the control panel and the appliance. What it does

• Selects the user-chosen cycle or function when you turn or press the control dial
• Sends the appropriate signal to the appliance control so the chosen program can start
• Common symptom: control knob turns but the appliance does not change settings
• Common symptom: intermittent or no response from the control dial

• One selector switch module

• Disconnect power (unplug or switch off breaker) before beginning any repair
• Access usually requires removing the control panel or console; keep track of screws and fasteners
• Carefully unplug electrical connectors and note their orientation before removing the old switch
• Test operation after installation and reassemble the control panel securely

This replacement control knob restores tactile control for a range of Bosch appliances, letting you easily select and adjust settings when the original knob is broken, cracked, or missing. Simple, direct replacement for one worn dial. What it does

• Provides a secure grip to turn appliance controls and select settings
• Replaces knobs that are cracked, stripped, loose, or no longer grip the control shaft
• Restores accurate user input when the original knob won't stay set or spins freely
• Fits as a direct-form replacement; matches the original look and feel

• Disconnect power to the appliance before servicing to avoid injury
• Most knobs pull straight off the control shaft; gently pull while steadying the shaft
• Align internal splines with the shaft and push fully on until seated
• If knob is tight or stuck, protect finish with a cloth and use steady, even pressure.

This bottom panel is the dishwasher toe-kick cover that restores the appliance's finished look and protects the lower front area from dirt and damage. It replaces a damaged, bent, or missing kick panel to keep the front of the machine sealed and tidy. What it does:

• Covers and protects the dishwasher's lower front/take-kick area from dirt, dust, and impact
• Helps direct airflow and prevents debris from entering the base area
• Restores the appliance's appearance when the original panel is dented, scratched, or missing
• Prevents loose edges that can catch on flooring or clothing

• One bottom panel as shown

• Disconnect power to the appliance before beginning any work
• Remove the existing kick panel and fasteners, align the replacement, and secure with the factory screws
• Handle edges carefully to avoid cuts; use appropriate tools and avoid overtightening fasteners