Parts for Ge HTS18GBRERWW: 02 - Cabinet Parts

Refrigerator shelf support that holds shelving in place inside your fridge. Replace this part if the original is cracked, broken, or no longer secures properly.

Mounting bracket that secures shelves and internal components in your refrigerator. Replace if cracked, broken, or missing to keep shelves stable and prevent shifting.

Replacement freezer step shelf for top-mount refrigerators. Installs in freezer compartment to organize food storage. Replace if cracked, broken, or missing.

Plastic plug button that covers screw holes on the freezer evaporator cover. Replace if cracked, broken, or missing during evaporator access or repair.

Shelf Frame only, Glass not included

Replace a cracked, chipped, or missing glass shelf in your refrigerator. Restores smooth storage surface to keep food organized and visible.

Replacement meat pan drawer for the fresh food section. Restores organized storage when original is cracked, broken, or missing. Slides into shelf rails.

Clear lower crisper drawer for refrigerator vegetable storage. Replace your cracked, broken, or missing drawer to restore organized produce storage.

The Glass Shelf is an OEM part for GE refrigerators. This sturdy glass shelf is designed to fit securely within the refrigerator compartment, providing a stable surface for organizing food and beverages. The glass shelf measures approximately 24 inches in width and 12 inches in depth. 

You should replace this glass shelf if it becomes cracked, chipped, or otherwise damaged. Common causes of damage include accidental impacts, placing excessively heavy items on the shelf, or sudden temperature changes that can weaken the glass over time.

Symptoms of a bad glass shelf include:

• Visible cracks or chips in the glass
• The shelf not sitting securely or wobbling
• Difficulty in organizing items due to the shelf's instability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Clear plastic cover that sits over crisper drawers to maintain humidity. Replace if cracked, broken, or warped. Frame only, glass shelf sold separately.

Leveling leg threads into the refrigerator base to support and stabilize the cabinet. Replace if cracked, broken, or worn to keep your unit level.

Rear mobility wheel mounts to the back base of your refrigerator. Replace if worn, cracked, or causing uneven rolling when moving the unit for cleaning.

The GE access cover is an OEM replacement part responsible for covering the compressor area on a refrigerator. This panel is located on the rear or bottom of the refrigerator and provides easy access to the compressor and condenser coils and prevents dirt and debris from entering the compressor area. When this part becomes damaged, it can lead to issues such as poor cooling performance, excessive noise from the compressor area, or even compressor overheating.

Symptoms of a bad access cover include:

• Visible cracks, breaks, or deformation in the cover
• Difficulty in securing the cover properly in place
• Increased dust or debris buildup inside the refrigerator
• Exposed internal components

Causes of a bad access cover can include accidental impacts, wear and tear from frequent removal and reinstallation, and environmental factors like temperature fluctuations or moisture exposure.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures the refrigerator door to the cabinet and provides a pivot point for smooth operation. Replace if cracked, worn, or causing misalignment.

Rear rail support plate for refrigerators. Mounts inside the cabinet to support shelving rails. Replace if cracked, broken, or missing for stability.

White plastic corner cap that snaps onto refrigerator door corners to conceal fasteners and protect hinge areas. Replace if cracked, broken, or missing.

Small washer that fits on refrigerator door hinges to distribute weight and reduce friction. Replace if worn, cracked, or missing to restore proper alignment.

Bottom door hinge bracket for your refrigerator. Installs at the lower door position to support proper alignment. Replace if bent, cracked, or broken.

If you need the hinge order WR49X20708

Positions refrigerator door components with correct clearance for smooth swinging and level alignment. Replace if worn, cracked, or missing to restore fit.

Bottom hinge pin secures the refrigerator door at the base, allowing smooth opening and closing. Replace if worn, damaged, missing, or door sags.

Left hand gusset bracket for refrigerators. Structural support piece that mounts inside the cabinet. Replace if cracked, bent, or missing.

Structural bracket that reinforces refrigerator door or drawer frames. Replace when the original gusset is cracked, broken, or worn to restore alignment.

Protective cover for the icemaker receptacle in your freezer compartment. Prevents moisture from entering the socket when an icemaker is not installed.

Insulation foam that protects electrical components in your top-mount refrigerator. Replace if cracked, deteriorated, or missing to maintain proper coverage.

Rubber bumper that cushions and mounts the evaporator fan motor assembly. Replace if cracked, deteriorated, or missing to reduce vibration and noise.

Mounting screw for refrigerator interior components and panels. Replace if lost, stripped, or damaged during maintenance. Essential hardware for secure assembly.

Fixes noisy fan, ice buildup, or warm fridge temps. This evaporator fan motor circulates cold air between compartments. DIY-friendly repair, 1 hour.

Mounts the evaporator fan assembly inside the freezer compartment. Replace if cracked, broken, or damaged from repeated fan motion or temperature stress.

Rear mounting bracket that secures the evaporator fan in your refrigerator. Replace if bracket is cracked, bent, or broken, causing fan misalignment.

Refrigerator not cooling evenly or making noise? The evaporator fan blade circulates cold air. Simple press-on installation in under 30 minutes.

Rubber grommet that seals and cushions where the evaporator fan motor shaft mounts. Replace if cracked, worn, or missing to eliminate noise and vibration.

Replace missing or stripped dishwasher mounting screws. Secures internal components and panels. Essential hardware for reassembly after repairs.

Secures brackets, panels, trim, and covers inside your refrigerator. Replace this screw if stripped, missing, or damaged to restore tight assembly.

Replacement mounting screw for securing panels, trim, and internal brackets. Needed when original fasteners are missing, stripped, or damaged.

Replace missing or stripped screws for refrigerator panels, hinges, brackets, and trim. Restores secure mounting to eliminate rattling and gaps.

Wire tie retainer for refrigerators. Secures and organizes internal wiring. Replace if cracked, broken, or missing to keep wires properly bundled.