Parts for Maytag NFW7200TW10: 03 - Tub And Basket Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This pulley guides and maintains tension on the dryer/belt assembly so the drum turns smoothly and quietly. It replaces a worn or damaged idler pulley to restore proper belt tracking and reduce noise. What it does

• Guides the drive belt and keeps correct belt tension so the drum spins consistently
• Reduces belt squeal and vibration caused by a worn or seized pulley
• Helps prevent premature belt wear and slipping
• Supports smooth drum rotation when bearings move freely

• One pulley

• Disconnect power before service; follow appliance safety procedures
• Inspect the belt and related rollers; replace any worn components for best results
• Basic hand tools required

Note: Serial number starting with "10, 11, 12, 13 or 14".

This shock absorber stabilizes the washer's tub during spin by absorbing vibration and movement. Replacing a weak damper helps reduce shaking and banging for smoother, quieter cycles and better spin performance.

• Controls tub motion and dampens vibration during acceleration, spin, and braking
• Helps prevent excessive shaking, thumping, and walking
• When worn, can cause loud banging, off-balance interruptions, or longer spin times
• Supports the suspension to reduce stress on hoses and other components

• Disconnect power and turn off water supply before servicing
• Support the tub to relieve load on the damper; remove mounting pins/bolts
• Install the new damper in the same orientation; ensure both ends are fully seated/locked and reuse original hardware if required
• Reassemble panels and run an empty spin test to ensure smooth operation

This shock absorber mounts between the washer tub and cabinet base to control movement during agitation and spin. Replacing a worn damper restores stability, reducing vibration and noise for smoother, more reliable cycles.

• Cushions and limits tub movement to absorb vibration during spin
• Helps prevent banging, "walking," and excessive shaking
• Supports proper balance so the washer can reach and maintain full spin speed
• Common symptoms of failure: loud thumping, unbalanced/no-spin interruptions, machine moving across the floor

• Disconnect power and turn off water before servicing
• Access shocks per model; support the tub to relieve load before removal
• Reuse existing mounting hardware if applicable; tighten all fasteners securely
• After replacement, level the washer and run a rinse/spin test; consider replacing shocks as a set for even damping

A hex head mounting bolt used to fasten appliance components securely. This genuine-design replacement restores proper fit where a standard hex bolt is required for panels, brackets, or assembly points. What it does

• Secures panels, brackets, or assemblies to maintain safe, stable appliance operation
• Stops rattling or misalignment caused by a missing or damaged bolt
• Restores factory-fit connections after repairs or part replacements
• Matches OEM fit and fastening function for reliable reassembly

• One hex head mounting bolt

• Disconnect power and gas before accessing internal parts
• Use the correct socket or wrench size to avoid rounding the head
• Tighten to snug fit; do not overtighten to prevent stripping threads
• Replace with the same type and size bolt; if threads are damaged, repair or replace the mating component

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Black. For biscuit order 98008169. For white order WP98008544.

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Water leaks around the hose connection points
• The hose slipping off the fitting
• Visible rust or wear on the clamp
• Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.