Parts for Thermador CMT-231: 06 - Rear Body Parts

This discharge adapter connects the appliance's drain hose to the drain or pump outlet, restoring a secure path for wastewater and preventing leaks. Fits the factory connection point to ensure correct hose alignment and sealing. What it does:

• Provides a sealed connection between the appliance drain/pump outlet and the drain hose
• Prevents leaks and water dripping at the hose connection
• Helps restore proper drainage when the original adapter is cracked, worn, or missing
• Matches OEM connection dimensions to maintain proper hose routing and fit

• Disconnect power to the appliance and turn off water supply before starting
• Inspect hose and clamps; replace clamps or hose if damaged for a reliable seal
• Push adapter fully onto the outlet and secure hose with a clamp per manufacturer guidance

This flexible conduit protects and routes appliance wiring, helping prevent chafing and damage while keeping electrical connections neat and secure. Use when the original conduit is cracked, split, or no longer holding wiring safely. What it does:

• Shields electrical wires from abrasion, moisture, and contact with sharp edges
• Maintains a tidy wire path between components and chassis openings
• Reduces risk of short circuits caused by exposed or pinched wiring
• Helps prevent intermittent operation or breaker trips tied to damaged wiring

• Always disconnect power to the appliance before inspecting or replacing wiring components
• Inspect adjacent wire harnesses and connectors for damage before reinstalling the conduit
• Secure both ends with the factory retainers or approved clamps; do not leave wiring unsupported
• Do not cut, splice, or modify the conduit in ways not specified by the appliance manufacturer

This insulation cover replaces the damaged or missing insulating panel to help maintain proper heat containment and reduce noise. It's a like-for-like exterior cover used where appliance insulation needs protection or coverage. What it does:

• Protects and secures internal insulation from damage, debris, and movement
• Helps maintain proper thermal containment for efficient appliance operation
• Reduces vibration-related noise by holding insulation in place
• Restores the appliance's intended internal barrier when the original cover is cracked or missing

• One insulation cover as pictured and specified by the OEM supercession

• Disconnect power and shut off fuel before attempting service
• Handle with care and wear gloves; insulation edges may be sharp or fibrous
• Confirm correct orientation and secure fasteners; do not compress insulation beyond OEM fit

This welded insulation tube assembly protects and separates the oven's heating element wiring from metal chassis, reducing shorting risk and heat transfer. It fits where a durable, high-temperature insulator is required. What it does:

• Separates and insulates heating-element wiring from surrounding metal parts
• Helps prevent electrical shorts and arcing near the element
• Resists high oven temperatures to maintain safe clearances
• Preserves wiring routing and component alignment for reliable operation

• One welded insulation tube assembly

• For safety, disconnect power to the appliance before servicing
• Handle carefully to avoid damaging insulation or attached wiring
• Verify correct orientation and secure mounting per oven wiring layout
• Replace those components rather than reusing compromised parts

This wire guard is a small protective bracket that keeps appliance wiring routed and shielded from heat and abrasion, helping prevent chafing and accidental contact with moving parts for safer, more reliable operation. What it does:

• Protects wiring from rubbing, pinching, and contact with sharp edges or moving components
• Helps prevent electrical arcing or shorting caused by damaged insulation
• Keeps harnesses neatly routed to reduce strain and vibration-related wear
• Common symptom relief: frayed or exposed wires, intermittent power, burning or arcing smells near wiring

• One wire guard

• Disconnect power (unplug or switch off breaker) before inspecting or servicing wiring
• Handle panels and edges carefully — use gloves to avoid cuts from sheet metal
• Ensure wiring is routed under the guard and secured as originally positioned
• If wiring shows damage, replace the wiring or harness rather than relying on the guard alone

A replacement high-temperature cut-out that helps protect ovens by interrupting power if internal temperatures rise above safe levels. Restores the appliance's over-temperature protection so heating elements can be safely shut off when needed. What it does:

• Monitors oven temperature and opens the circuit if temperatures exceed a safe threshold to prevent overheating.
• Stops power to heating elements when tripped, preventing further temperature rise.
• Common symptoms of a failing cut-out: oven won't heat, continuous heating or no control over temperature, or oven shuts off unexpectedly.
• Used as a safety device in the oven's temperature-control system.

• Disconnect power at the breaker and allow the appliance to cool completely before servicing.
• Replace with the exact OEM cut-out and secure all wiring connections.

A replacement high-temperature cut-out that helps protect ovens by interrupting power if internal temperatures rise above safe levels. Restores the appliance's over-temperature protection so heating elements can be safely shut off when needed. What it does:

• Monitors oven temperature and opens the circuit if temperatures exceed a safe threshold to prevent overheating.
• Stops power to heating elements when tripped, preventing further temperature rise.
• Common symptoms of a failing cut-out: oven won't heat, continuous heating or no control over temperature, or oven shuts off unexpectedly.
• Used as a safety device in the oven's temperature-control system.

• Disconnect power at the breaker and allow the appliance to cool completely before servicing.
• Replace with the exact OEM cut-out and secure all wiring connections.