Parts for Thermador CT227N-01: 10 - Door Parts

This is a white handle spacer that fits between a door handle and the appliance panel to provide correct alignment and a finished appearance. It restores proper handle spacing and helps the handle sit flush. What it does:

• Positions and supports the door handle so the handle mounts evenly and securely
• Maintains correct clearance between handle and door or trim for smooth operation
• Restores alignment and appearance when the original spacer is cracked, worn, or missing
• Helps prevent handle wobble or contact damage to the door surface

• Designed for straightforward replacement; remove the handle per your model instructions before swapping the spacer
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the new spacer
• Disconnect power (or follow appliance-specific safety steps) when working near electronic controls or wiring

This door strike is the small metal latch that engages the door catch so the appliance door closes and stays secure. Replaces a worn or damaged strike to restore proper door latching and safe operation. What it does:

• Provides the mating latch surface for the door catch so the door stays closed
• Restores secure door closure when a worn or bent strike prevents latching
• Can help resolve symptoms such as a door that won't stay closed, won't latch, or prevents the unit from starting
• Black oxide finish resists corrosion and reduces visible wear

• One door strike (black oxide)

• Disconnect power (and water for dishwashers) before beginning any repair
• Remove door panel or access trim to reach the strike; keep screws and fasteners organized
• Align strike carefully with the door catch; tighten screws snugly but avoid over-torquing
• Test door operation and any door-interlock switches before reassembling the unit

This welded porcelain door liner replaces the appliance's interior door shell to restore a smooth, heat-resistant surface and proper door fit. It helps maintain cooking performance and an easy-to-clean oven interior. What it does:

• Replaces a cracked, dented, or warped inner door surface that can trap grease or interfere with door closure
• Restores a continuous porcelain interior for even heat retention and easier cleaning
• Helps eliminate rattling or misalignment caused by a damaged liner
• Preserves support for the door glass and inner components

• Disconnect power to the appliance before starting and allow the oven to cool completely.
• Handle the assembly carefully — it may be heavy and has sharp edges; use gloves and eye protection.
• Door removal and partial disassembly are commonly required; follow the manufacturer's service instructions.
• Inspect door glass, clips, and seals while replacing the liner and replace any damaged parts.

This inner door glass panel replaces the interior glass pane in the door assembly. It restores a clear, heat-resistant barrier so your appliance can retain heat and operate safely after the original pane cracks or shatters.

• Serves as the interior glass pane of the door facing the cavity
• Helps insulate the cavity to maintain stable cooking temperatures
• Direct replacement for cracked, shattered, or missing inner glass
• Can help address heat loss and unsafe door conditions

• Disconnect power at the breaker and allow the appliance to cool completely before starting
• Remove the door per your model's service instructions and place it on a padded work surface
• Wear cut-resistant gloves and eye protection; handle glass by the edges
• Transfer any brackets/clips in the original order and tighten fasteners snugly without overtightening

This inner door glass panel replaces the interior glass pane in the door assembly. It restores a clear, heat-resistant barrier so your appliance can retain heat and operate safely after the original pane cracks or shatters.

• Serves as the interior glass pane of the door facing the cavity
• Helps insulate the cavity to maintain stable cooking temperatures
• Direct replacement for cracked, shattered, or missing inner glass
• Can help address heat loss and unsafe door conditions

• Disconnect power at the breaker and allow the appliance to cool completely before starting
• Remove the door per your model's service instructions and place it on a padded work surface
• Wear cut-resistant gloves and eye protection; handle glass by the edges
• Transfer any brackets/clips in the original order and tighten fasteners snugly without overtightening

This glass retainer bracket secures oven door glass and helps keep the inner panel aligned for a stable, sealed door. Replacing a worn bracket restores proper glass support and reduces rattling or misalignment. What it does:

• Holds the oven door inner glass in place and maintains panel alignment.
• Prevents the glass from shifting, reducing noise and vibration during use.
• Helps restore a tight door fit that can improve heat retention and consistent cooking.
• Common symptom: loose, rattling, or misaligned door glass.

• One white glass retainer bracket.

• Disconnect power to the appliance before starting and allow surfaces to cool.
• Handle door glass carefully; use gloves and place on a padded surface to avoid damage.
• Verify orientation and fit before tightening fasteners; do not overtighten to prevent cracking the glass.

This part has been discontinued and is no longer available.