Parts for Thermador GSC30WC: 13 - Door Assembly Parts

This replacement window frame secures and finishes the door glass, restoring the appliance door's fit and appearance. It keeps the glass held in place and helps maintain a proper seal and smooth operation. What it does:

• Holds and supports the inner/outer door glass panel
• Restores proper alignment and fit of the door assembly
• Helps prevent drafts, splashes, and visible gaps around the door glass
• Commonly replaced when cracked, warped, or cosmetically damaged

• One window frame

• Disconnect power and water before starting repairs
• Handle glass and frame edges carefully; wear cut-resistant gloves and eye protection
• Some door disassembly may be required; follow the OEM service instructions for your model

This inner door glass panel replaces the interior glass pane in the door assembly. It restores a clear, heat-resistant barrier so your appliance can retain heat and operate safely after the original pane cracks or shatters.

• Serves as the interior glass pane of the door facing the cavity
• Helps insulate the cavity to maintain stable cooking temperatures
• Direct replacement for cracked, shattered, or missing inner glass
• Can help address heat loss and unsafe door conditions

• Disconnect power at the breaker and allow the appliance to cool completely before starting
• Remove the door per your model's service instructions and place it on a padded work surface
• Wear cut-resistant gloves and eye protection; handle glass by the edges
• Transfer any brackets/clips in the original order and tighten fasteners snugly without overtightening

This inner door glass panel replaces the interior glass pane in the door assembly. It restores a clear, heat-resistant barrier so your appliance can retain heat and operate safely after the original pane cracks or shatters.

• Serves as the interior glass pane of the door facing the cavity
• Helps insulate the cavity to maintain stable cooking temperatures
• Direct replacement for cracked, shattered, or missing inner glass
• Can help address heat loss and unsafe door conditions

• Disconnect power at the breaker and allow the appliance to cool completely before starting
• Remove the door per your model's service instructions and place it on a padded work surface
• Wear cut-resistant gloves and eye protection; handle glass by the edges
• Transfer any brackets/clips in the original order and tighten fasteners snugly without overtightening

This porcelain inner door liner replaces a damaged or worn dishwasher door interior to restore appearance and protection for the door assembly. Durable porcelain finish resists stains and provides a smooth, cleanable surface. What it does:

• Replaces a cracked, chipped, or corroded inner door surface to improve aesthetics and durability
• Protects internal door components and wiring behind the liner
• Helps maintain an even inner surface for proper door sealing and spray distribution
• Matches OEM welded-assembly construction for a factory fit and finish

• One porcelain door liner

• Disconnect power to the appliance before beginning any repair
• Handle the liner carefully — edges and mounting points can be sharp
• Removing the outer door skin and transferring hardware may be required; keep fasteners and components organized

This inner door glass panel replaces the interior glass pane in the door assembly. It restores a clear, heat-resistant barrier so your appliance can retain heat and operate safely after the original pane cracks or shatters.

• Serves as the interior glass pane of the door facing the cavity
• Helps insulate the cavity to maintain stable cooking temperatures
• Direct replacement for cracked, shattered, or missing inner glass
• Can help address heat loss and unsafe door conditions

• Disconnect power at the breaker and allow the appliance to cool completely before starting
• Remove the door per your model's service instructions and place it on a padded work surface
• Wear cut-resistant gloves and eye protection; handle glass by the edges
• Transfer any brackets/clips in the original order and tighten fasteners snugly without overtightening

This inner door glass panel replaces the interior glass pane in the door assembly. It restores a clear, heat-resistant barrier so your appliance can retain heat and operate safely after the original pane cracks or shatters.

• Serves as the interior glass pane of the door facing the cavity
• Helps insulate the cavity to maintain stable cooking temperatures
• Direct replacement for cracked, shattered, or missing inner glass
• Can help address heat loss and unsafe door conditions

• Disconnect power at the breaker and allow the appliance to cool completely before starting
• Remove the door per your model's service instructions and place it on a padded work surface
• Wear cut-resistant gloves and eye protection; handle glass by the edges
• Transfer any brackets/clips in the original order and tighten fasteners snugly without overtightening

This right-side clear handle end cap replaces a cracked, broken or missing trim piece to restore the refrigerator door's finished look and help keep the handle secure. It matches the original shape and finish for a clean appearance. What it does:

• Covers and protects the outer end of the door handle for a finished look
• Helps hold the handle hardware in place and prevents exposed fasteners
• Replaces damaged or missing trim that can snag or look worn
• Restores OEM appearance when the original end cap is cracked, faded or broken

• Typically snaps or screws into the handle; remove the handle per your model's instructions before replacing
• Use caution with trim clips and small fasteners to avoid breakage
• Clean mating surfaces before installation for best fit

This left-side, clear handle end cap restores the finished look and secure fit of a dishwasher or appliance handle. It replaces a cracked or missing end cap to keep the handle aligned and prevent snagging. What it does:

• Covers and protects the handle's exposed end, restoring appearance
• Holds the handle trim in place to maintain proper alignment
• Prevents sharp edges or gaps that can catch clothing or fingers
• Matches the original clear finish for a near-invisible repair

• Basic snap-on or screw-retained installation; verify hardware and orientation before fastening
• Power off and open the appliance door fully to access the handle area if needed
• Handle and surrounding trim may need gentle removal to fit the end cap; use non-marring tools

This part has been discontinued by the manufacturer and is no longer available.

A flanged gray bushing that cushions and supports the appliance door glass, helping reduce noise and wear where the glass meets the door frame. Replaces a worn or damaged bushing to restore proper fit and quiet operation. What it does:

• Positions and stabilizes the door glass at the flange to prevent rubbing and vibration
• Cushions the glass to reduce rattling and chatter during operation
• Helps maintain correct spacing to avoid glass contact with metal edges
• Small part failure can allow the glass to shift, vibrate, or produce noise

• One flanged gray door glass bushing

• Disconnect power (unplug or switch off circuit breaker) before beginning any service
• Handle door glass carefully; support it to prevent breakage when removing/installing the bushing
• Replacement typically requires partial door disassembly—follow OEM instructions
• Inspect adjacent clips, seals, and mounting surfaces for wear and replace as needed

This lock washer secures fasteners by biting into the mating surface to resist loosening from vibration and thermal cycling. It's a small but critical retaining part used on appliance assemblies where a secure, vibration-resistant connection is required. What it does

• Provides a spring clamp action that helps keep bolts and screws from backing out under vibration
• Maintains tension on threaded connections during thermal expansion and contraction
• Commonly used on motor mounts, pump assemblies, and panels that experience movement
• Can reduce intermittent electrical/grounding issues caused by loose hardware

• One lock washer

• Inspect threads and mating surfaces; replace any damaged fasteners before installing the washer
• Install with the correct-sized bolt or screw; washer must fit snugly to function properly
• Tighten to manufacturer torque specifications when available; avoid over-tightening
• Disconnect power and follow all safety precautions before servicing the appliance

This door strike is the small metal latch that engages the door catch so the appliance door closes and stays secure. Replaces a worn or damaged strike to restore proper door latching and safe operation. What it does:

• Provides the mating latch surface for the door catch so the door stays closed
• Restores secure door closure when a worn or bent strike prevents latching
• Can help resolve symptoms such as a door that won't stay closed, won't latch, or prevents the unit from starting
• Black oxide finish resists corrosion and reduces visible wear

• One door strike (black oxide)

• Disconnect power (and water for dishwashers) before beginning any repair
• Remove door panel or access trim to reach the strike; keep screws and fasteners organized
• Align strike carefully with the door catch; tighten screws snugly but avoid over-torquing
• Test door operation and any door-interlock switches before reassembling the unit

This is a replacement mounting screw used to secure components and panels in compatible Bosch appliances. It provides a simple way to restore proper fit and prevent loose parts or rattling. What it does:

• Fastens panels, brackets, or small components to appliance frames
• Restores secure mounting when original screw is missing or damaged
• Helps stop vibration-related noise from loose parts
• Matches OEM fit and thread for reliable fastening when the correct screw is specified

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread damage or cracking nearby plastic
• Turn off and unplug the appliance or disconnect power before accessing internal components