Parts for Kenmore 796.51972610 (79651972610, 796 51972610): Accessory Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This accessory assembly is a factory replacement component that restores the original mounting/connection function in compatible LG appliances, helping eliminate loose fittings and restore secure operation. What it does

• Replaces a worn or damaged accessory assembly that secures or connects appliance components.
• Restores proper alignment and engagement of the affected assembly to reduce rattling or movement.
• Can help address symptoms such as loose parts, intermittent connection issues, or unusual noises originating near the assembly.
• Matches OEM fit and form to maintain original performance when installed correctly.

• Disconnect power (unplug or shut off breaker) before beginning any repair.
• Basic hand tools are typically required; follow the appliance service manual for removal and installation steps.
• Inspect surrounding components for wear or damage while replacing this assembly.

This accessory assembly is a factory-style replacement that restores missing or damaged accessory components so the appliance operates as intended. It provides the correct mounting and connection points for attached parts. What it does:

• Replaces a damaged or missing accessory assembly to restore proper accessory function
• Provides the OEM mounting points, connectors, and hardware interface for attached components
• Addresses symptoms such as loose or missing accessory parts, intermittent accessory connections, or improper fit
• Helps ensure accessories attach securely and align correctly with the appliance housing

• Disconnect power and water before starting service
• Follow the OEM instructions for removal and installation
• Basic hand tools are typically required; avoid forcing clips or connectors

Replacement dispenser assembly that restores the refrigerator door's water/ice dispensing function and replaces a cracked or non-working dispenser chute or bezel. Helps stop leaks and returns reliable dispensing action. What it does:

• Routes water and/or ice from the dispenser to the cup and houses the dispenser actuator and mounting points.
• Replaces cracked, broken or worn dispenser chutes and bezels that cause leaks or catching.
• Restores dispenser lever/actuator responsiveness when the door switch or paddle is damaged.
• Can stop visible leaking from the dispenser area and improve user access to dispensed water or ice.

• Disconnect power and water supply before starting work to avoid shock or leaks.
• Remove refrigerator door trim or liner to access dispenser mounting screws and connectors.
• Handle sharp sheet-metal edges and beverage lines carefully; inspect and replace any damaged gaskets or tubing.

A Taptite screw used to fasten sheet metal and plastic appliance panels. This self-tapping fastener secures trim, brackets, and internal components for a reliable hold during normal use. What it does:

• Creates its own threads in metal/plastic for a tight, vibration-resistant connection
• Commonly used to secure control panels, trim pieces, and mounting brackets
• Helps stop rattles and keeps panels aligned when properly installed
• Compatible with repair and maintenance tasks where original fasteners are required

• Use the correct sized driver and steady pressure to avoid stripping the head
• Start straight and drive slowly until snug; do not over-tighten
• Wear eye protection when working with small fasteners and metal panels
• Replace any damaged or stripped screws with the exact OEM fastener

This clamp assembly secures a hose or tubing connection to maintain a watertight seal and reduce vibration. Replacing a worn or damaged clamp helps stop leaks and prevents hoses from slipping loose during operation. What it does:

• Holds a hose or tube firmly in place to maintain proper sealing at the connection point.
• Prevents leaks caused by loose, cracked or corroded clamps.
• Reduces vibration and rattling from unsecured hoses.
• Common symptom: visible leaking, water pooling, or a loose hose connection.

• Disconnect power and shut off water supply before starting any repair.
• Use the correct pliers or screwdriver for the clamp type; avoid damaging the hose.
• Inspect the mating hose and seal; replace any cracked or hardened hoses before reinstalling.
• Do not overtighten—tighten just enough to secure the hose without cutting or deforming it.

This inlet hose delivers water from the household supply to the appliance for normal fill cycles. It restores proper water flow when the original inlet hose is damaged, cracked, or leaking. What it does:

• Channels incoming water from the household supply to the appliance's fill valve
• Replaces a worn, cracked, or leaking inlet hose to stop external leaks
• Helps restore normal fill and wash cycles affected by restricted or damaged hoses
• Fits as a direct replacement for the corresponding OEM inlet connection

• One inlet hose

• Disconnect power and shut off the water supply before starting any work
• Inspect fittings and replace any damaged clamps or seals to ensure a watertight connection
• Hand-tighten connections, then snug with a wrench—avoid over-tightening which can damage fittings
• Test for leaks by running a short fill cycle and checking all connections

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This inlet hose connects the home's water supply to the appliance, supplying water for normal operation and allowing reliable fill cycles. It replaces a worn or damaged inlet hose to help stop leaks and restore proper water flow. What it does:

• Carries incoming water from the household supply to the appliance's fill valve
• Replaces cracked, split, or leaking inlet tubing that causes drips or puddling
• Restores proper fill during cycles when a damaged hose restricts flow
• Helps prevent water damage from failed or deteriorated inlet lines

• Turn off the water supply and unplug the appliance before replacing the hose
• Inspect fittings and replace any damaged clamps or seals to ensure a watertight connection
• Hand-start threads, then tighten fittings securely; avoid overtightening plastic fittings
• After installation, turn water on and run a short cycle while checking carefully for leaks

This pipe connector joins appliance water tubing to the inlet assembly, restoring a secure, leak-resistant connection so the dispenser or ice-making system can get a steady water supply. Ideal when fittings are cracked or worn. What it does:

• Creates a watertight connection between supply tubing and the appliance inlet/valve
• Stops leaks caused by cracked, split, or loose fittings at the tubing junction
• Restores proper water flow to dispensers and ice makers when a bad connector is the cause
• Helps prevent water pooling and potential damage from slow leaks

• Turn off water supply and disconnect power before replacing the connector
• Inspect tubing ends for damage and trim squarely if needed before installing
• Use correct tools and tighten fittings per manufacturer guidance; do not overtighten
• After installation, restore water and power and check carefully for leaks

This drain hose connector links the dishwasher's drain hose to its mating port for a secure, leak-resistant fit, helping wastewater exit properly and reducing leaks at the hose connection point. What it does:

• Joins the drain hose to the appliance's drain system and maintains a tight seal
• Helps ensure proper drainage during the pump-out portion of the cycle
• Provides a secure connection to resist hose slippage
• Common symptoms include leaks near the hose fitting, a loose or cracked connector, the hose popping off, or slow/poor draining due to a loose connection

• Disconnect power at the breaker and shut off the water supply before servicing
• Pull the unit forward to access the drain path and place a towel to catch residual water
• Loosen the hose clamp(s), remove the old connector, fully seat the hose on the new connector, and re-secure the clamp(s)
• Run a short cycle and check all connections for leaks

This is a drain hose made of durable plastic that is used in a variety of washing machines. The drain hose is the component responsible for removing any wastewater from the appliance. It is located on the back of the washing machine near the water hookups. The drain hose takes dirty water out, while the other hoses bring fresh water in. If the drain hose is damaged, it can prevent the washer from filling, cause water leaks, or result in loud noises.If the drain pump is cracked or broken it should be replaced. Disconnect the appliance from power and water before starting. Remove the clamps that hold the drain hose to the back of the washer. Remove the drain hose. Next, take the new drain hose and slide the clamp onto it. Install the hose into the machine and reassemble it before using the appliance.This drain hose is created to be compatible with LG washing machines. It is sold as an individual part. This is a genuine OEM replacement component that is directly sourced from the manufacturer.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.