Parts for Briggs & Stratton 128602-0445-B1: Air Cleaner, Exhaust System Parts

Flange screws have a flange located near the top of the screw, which helps to distribute the connection force over a larger area to reduce potential damage to the machine. It also allows the screws to be used in oversized or irregular holes, and it helps to ensure they stay in place. This flange screw also has a hex top. Screws can last for a long time. However, they may become corroded or worn over time and need to be replaced. They could also become lost and need a replacement. Without all of the screws in the proper places in a machine, it could vibrate too much, which could render it less effective or unsafe to use. The flange screw is a genuine OEM part that can be used with many types of machines including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, generators, wood chippers, and other small engines. The screws are compatible with Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, Simplicity, and MTD.

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.

This exhaust gasket is a genuine Midwest Engine replacement part for appliances that use small engines, such as chipper shredders, snowblowers, leaf blowers, and lawn mowers. The function of an exhaust gasket is to seal off the carburetor from the exhaust tube in order to protect the engine from the accumulation of dirt, debris, and gunk within the inner workings. The exhaust gasket may require replacement over time from general wear and tear. If the exhaust gasket is not sealing, allowing dirt and debris to accumulate within the carburetor and leaving the exhaust tube exposed, the part should be replaced immediately. Evidence of a damaged exhaust gasket could also manifest in the form of oil leakage, black smoke arising out of the exhaust tube, and unusually low pressure from the combustion when using the appliance. Any of these symptoms can be attributable to multiple factors, so one should assess if the exhaust gasket is responsible before ordering a replacement.This exhaust gasket is compatible with the following brands: Briggs and Stratton, Cub Cadet, Toro, and Simplicity. This part sold individually.

This genuine Midwest Engine foam pre-cleaner can be used as a replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. A foam pre-cleaner is an air filtration system made of a foam layer through which the air must pass before accessing the primary air filter. The purpose of a foam pre-cleaner is to put less stress and strain on the primary air filter, thereby requiring fewer primary air filter changes. The foam pre-cleaner in a small engine appliance should be cleaned once every 24 hours of appliance usage; if it is not cleaned regularly on this timetable, it is highly likely that it will have to be replaced after less than optimum hours of appliance usage. If the regular air filter has to be changed more than usual, it is likely that the current foam pre-cleaner has to be replaced as well. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This foam pre-cleaner is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, and Simplicity.

The primer is used to help circulate fuel to the carburetor, which ensures that the engine starts quickly. Primers can start to wear out over time, which can cause the engine to leak gas or the engine not to start at all. In those cases, it is time to look at the carburetor primer to see if it is properly in place and that it is still in good shape. If there is an issue, it is time to replace it. This genuine OEM replacement carburetor primer part is high-quality and is made to work with lawn mowers and small engines from a range of different brands. These brands include the likes of Craftsman, Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, and Simplicity.