Parts for Briggs & Stratton 092902-5202-01: Air Cleaners, Vertical Pull Parts

The stop wire is a safety cable device offered on many types of lawn and garden equipment. It is pressed near the upper handle of a device to start it, which lets the blades spin and creates forward motion on equipment that is self-propelled. A stop wire can stretch out over time and will need to be replaced to ensure total safety. If the blade brake control is released and the blades continue to spin for more than a couple of seconds, the wire needs to be replaced.Take the equipment and put it on a flat surface before taking the metal on the stop cable and moving it out of the mower handle. Squeeze the center tabs of the wire with needle-nose pliers and pull the cable end through the bracket. Pull the other end out and then replace it with a new component.This is an authentic OEM replacement part for use with garden equipment engines. It is an individual part that is sourced directly from the manufacturer. This part is compatible with lawnmowers, wood chippers, snowblowers, generators, log splitters, tillers leaf blowers, and pressure washers by Briggs & Stratton, MasterCut, Craftsman, Simplicity, Toro, MTD, Cub Cadet, Lawn-Boy, Murray, and Wheel Horse.

The stop wire is a safety cable device offered on many types of lawn and garden equipment. It is pressed near the upper handle of a device to start it, which lets the blades spin and creates forward motion on equipment that is self-propelled. A stop wire can stretch out over time and will need to be replaced to ensure total safety. If the blade brake control is released and the blades continue to spin for more than a couple of seconds, the wire needs to be replaced.Take the equipment and put it on a flat surface before taking the metal on the stop cable and moving it out of the mower handle. Squeeze the center tabs of the wire with needle-nose pliers and pull the cable end through the bracket. Pull the other end out and then replace it with a new component.This is an authentic OEM replacement part for use with garden equipment engines. It is an individual part that is sourced directly from the manufacturer. This part is compatible with lawnmowers, wood chippers, snowblowers, generators, log splitters, tillers leaf blowers, and pressure washers by Briggs & Stratton, MasterCut, Craftsman, Simplicity, Toro, MTD, Cub Cadet, Lawn-Boy, Murray, and Wheel Horse.

This pre-cleaner filter sifts out dirt, dust, and debris in the air so it doesn't end up in other parts of the lawn and garden equipment. The pre-cleaner filter is made of durable foam but can become damaged or dirty. If it starts to clog or has been damaged, it will need to be replaced. A visual inspection of the pre-cleaner filter will determine whether it needs a replacement.There are no tools needed to replace the pre-cleaner filter in a piece of outdoor lawn equipment. The first step is to open up the housing that holds the pre-cleaner filter. From there, the actual pre-cleaner filter can be inspected and removed if overly dirty or damaged. The new replacement pre-cleaner filter will go into the same location. This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold on an individual basis. The pre-cleaner filter is made for use with lawnmowers, tillers, leaf blowers, edgers, and wood chippers manufactured by Briggs & Stratton, Toro, Simplicity, and Lawn-Boy.