Parts for Whirlpool WML75011HB2: Air Flow Parts

This is the WHP2 electronic control board assembly for the washer's main control system. It replaces a failed PCB to restore the washer's cycle control and electronic functions for reliable operation. What it does:

• Receives and processes user commands to start and manage wash cycles
• Controls timing, valves, motor signals and other electronic components
• Reads and responds to sensor inputs and error conditions
• Enables display/indicator operation and cycle status reporting

• Disconnect power to the appliance before attempting replacement to avoid shock.
• Handle the board carefully and avoid static discharge; use ESD protection if available.
• Replacement may require removing panels and connector harnesses.

This capacitor stores and releases electrical energy to help an AC motor start and run smoothly. Replacing a weak or failed capacitor can restore reliable motor operation and reduce humming, no-start, or stall conditions.

• Provides the phase shift and starting torque an induction motor needs to start
• Helps the motor reach and maintain proper speed under load
• Common symptoms of a failing capacitor: motor hums but won't start, intermittent starts, slow or stalled rotation, or frequent thermal trips
• Visible clues may include a swollen case or leaking residue

• Disconnect power to the appliance before servicing; verify no voltage is present
• Capacitors can retain a charge—discharge safely before handling
• Note wire positions; move leads to the new capacitor one at a time and ensure snug terminal fit
• Reuse the original bracket/clip if applicable and secure the capacitor to prevent vibration

This deflector is an air baffle that helps direct airflow and protect nearby components inside the appliance, improving temperature distribution and preventing debris buildup. Fits the original mounting points for a correct replacement. What it does:

• Directs internal airflow to help maintain even temperature or ventilation
• Shields nearby parts from heat, moisture, and lint or debris
• Helps reduce rattling or air-related noise when damaged or missing
• Common symptom: uneven heating, poor airflow, or visible broken/misaligned deflector

• Always disconnect power before attempting any repair
• Inspect surrounding clips or screws and replace any fasteners if worn
• Typically installs at existing mounting points;

This deflector redirects airflow inside the appliance to protect internal components and help maintain even temperature and drying performance. It's a simple, durable replacement that restores proper air routing in the affected chamber. What it does:

• Guides internal airflow to prevent hot or cold spots and protect nearby parts
• Helps restore intended venting and circulation for consistent operation
• Can reduce overheating or uneven drying symptoms when worn or damaged
• Prevents debris from entering sensitive areas when the original deflector is broken

• Designed for drop-in or fasten-in replacement; confirm orientation before fastening
• Disconnect power and water before beginning any repair
• Handle carefully to avoid sharp edges; use basic hand tools

This oven temperature sensor senses cooking cavity heat and sends accurate temperature readings to the range control so your oven can reach and maintain set cooking temperatures. Replaces a failed or intermittent sensor for consistent performance. What it does:

• Detects oven cavity temperature and relays readings to the controller
• Helps the oven maintain set temperatures for proper cooking and baking
• Common fix when oven won't heat correctly or displays inaccurate temps

• One oven temperature sensor (W10557536)

• Disconnect power to the appliance before servicing to avoid shock
• Handle the sensor and connector carefully; avoid bending or crimping the probe
• Verify connector type and routing match your model before final assembly

The Fan Motor is an OEM part for Whirlpool microwaves. This part is responsible for circulating air and removing steam, smoke, and odors from your microwave.

A bad vent fan motor can occur due to normal wear and tear, overheating, or electrical malfunction. If you notice symptoms such as weak or noisy fan operation, the fan not turning on at all, or poor ventilation performance, it may be time to replace this part.

Symptoms of a bad vent fan motor include:

• Weak or noisy fan operation
• Fan not turning on at all
• Poor ventilation performance

Restore your Whirlpool microwave by replacing the worn or damaged vent fan motor with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This fan motor moves air through the dryer to help remove moisture and maintain proper airflow. Replacing a worn or failed motor restores drying performance and reduces overheating risk. What it does:

• Spins the blower wheel to force air through the drum and vent
• Restores normal airflow when a dryer has weak or no air output
• Stops rattling or grinding noises caused by a failing motor bearing
• Helps prevent long dry times and potential overheating from restricted airflow

• One fan motor (single unit)

• Disconnect power to the appliance before beginning repair
• Access may require removing the dryer front or rear panel depending on model
• Support the drum or blower assembly when loosening mounting hardware to avoid damage

The LED Light Assembly is an OEM component for Whirlpool microwaves. Mounted to the top ceiling surface, this assembly houses multiple LED lights that illuminate the entire cooking cavity. 

Causes of a bad LED light assembly can include burnt-out bulbs losing luminescence after extended use or damage to wiring preventing power transmission.

Symptoms of a bad LED light assembly include: 

• Failure of lights to turn on when the microwave is powered 
• Dimming or flickering light output within the cooking space
• Looseness allowing the assembly to detach from the ceiling mount

Proper illumination is important for any cooking task. Replace with this OEM assembly for reliable, consistent lighting with every use. Compatible with Jenn-Air, Maytag, Amana, and select Kenmore models.
 

The Magnetron is an OEM part for Whirlpool microwaves. As a main cooking component, it produces microwave energy for safe, fast food reheating and preparation. 

Symptoms of a bad magnetron include:

• Slow or inefficient cooking needs increased time   
• Uneven heating causes cold or hot spots in dishes
• High-pitched humming or crackling from within the unit  
• Diminished or no power delivery for intended functions

Causes can be regular usage wear degrading magnets and tubes over time, sudden impact or power surges potentially damaging circuitry, or failures of microwave-generating elements.

This OEM Whirlpool part is also compatible with some Kenmore and Magic Chef.