Dave for Model Number GLTF294EE0 Washer won't always do high speed spin between wash and rinse cycles. Have to manually force the rinse mode to get it to spin out. E41 code stored. Replaced door switch/latch assembly. Can not get rid of E41 code, even for a second. Left washer unplugged for 5 hours code was there as soon as it was plugged in. Tried the unplug replug in and open close door 6 times also. Code still there.
Answer Hello Dave. Control board thinks the door switch is open. Disconnect the plug from J2 on the control board and check for continuity between the pins in the plug. Open. Check the door strike. If good, replace the door switch assembly. Closed. Replace the control board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, January 13, 2015