Mike for Model Number ATF6000FS0 I have an error code E58 which refers to high current on a motor phase. I have checked resistance across the windings and it is reading 5.7 ohms across each set.
Answer Hello Mike, This is an indication of either an excessive load on the motor or a harness issue. Test number 9 on the tech sheet advises to 1. Remove the belt from the motor and spin the motor pulley. Does the motor spin free? 2. Spin the tub pulley. Does the tub spin free? and 3. Disconnect the plug from the motor and measure the resistance of the windings (pin 1 to pin 2, pin 1 to pin 3, pin 2 to pin 3). All readings should be between 4 and 6 Ohms. If the readings are correct, replace the speed control board 134743500. If the readings are incorrect, replace the motor 137043000. Read More... Answered by AppliancePartsPros.com | Monday, October 26, 2015