Too Figidaire for Model Number PLHS267ZCB0 I have the typical Figidaire failure mode. Freezing of food on the fridge side, with no damper door movement except when I unplugged then re-plugged in the unit. The damper door would cycle once then stay fully open. Replaced the Control assembly. The fride side temperature control of new control unit had no effect. The damper motor only cycled the damper once, like the old one. The new control assembly uses only one connector on the damper motor, the original control used two connectors. Which connector should be used, the one closest or furthest to the motor? When I contacted the supplier, they sent me a second control box. The wiring to the fridge/freezer thermostats was reversed from the first new one! It didn't work either.Is there a schematic with color codes for the thermostats? I have a real issue with Figidaire quality control.
Answer Too Frigidaire, On the connection of the wire to the damper, you would want the wire connected closest to the damper. Also if you received a control box kit then you would use the included wire harness that comes with the kit to install the part. As for the wiring diagram on the unit. Here is a link to go to and if you click guides it will bring up the wiring diagram for download. http://www.frigidaire.com/Owner-Center/Product-Support--Manuals/?productCode=PLHS267ZCB0 Read More... Answered by AppliancePartsPros.com | Friday, March 13, 2015