Iblashaun for Model Number FFLE3911QW0 Frigidaire stackable number 30 on parts diagram control-electric oblong box goes in back i figured out most plugs had to go (only fit one place but there is four on top and not sure where to put plug afraid if i put wrong one on might burn my board up Can anyone tell me what colored wired plug goes where?
Answer Iblashaun, Next to each connector on the board there will be a number letter combination specifying what connector it is. The user interface board wire which are Black yellow Red and orange connector will go to the J17 connector on the board. White wire from the dryer connector will go to the J1-1 and the black wire from the dryer connector will be J1-2. the Lid lock which will be 2 grey and 1 black will go to connector J13, black on J13-1 the grey on the other 2. The water valve which has 2 blue and 2 white will go on Connector J18 and the blue will be pins 1 and 3 and the white on pins 4 and 6. Coming from the motor control unit there will be 5 wires 3 blue which will go to the J16 connector, and 2 grey which will go to the J12 connector. The clutch actuator will have 2 wires a white and a black which the white will go to the J20 pin 6 and the black will go to J9 pin 1. The drain pump motor has 2 orange wires that will go to the J15 connector pins 3 and 4. Read More... Answered by AppliancePartsPros.com | Monday, June 17, 2019