Wilson for Model Number fgf378wcca My oven will not light, the digital controls on top seem to work, if you hit preheat and set it to 350 in about 5 seconds it just cancels itself. I removed the ignitor next to the burner and connected it to 120v and it glows without any problem, do you think this module Part Number: AP4374595 is the problem.
Answer Hi Wilson. No, the spark module is for the top burners only. You need to check the oven sensor part # 5304497424. You need to see if it will ohm out between 1080-1,000 ohms. Move the wires as you check it, so if it is a open or shorted wire it will show up. Usually the oven sensor will bring up a F-3 code if defective. If the sensor is OK, then change the clock control part # 5303935102. Thank You. Read More... Answered by AppliancePartsPros.com | Tuesday, December 20, 2011