Customer Questions and Answers for Bottom Panel by Frigidaire

Ron, No special tools are required. It is a bit more involved than most : Remove power to the range. To remove and replace the bake element remove the oven door and all interior oven racks. Remove the two screws that secure the convection fan cover to the rear of the oven wall and remove the cover. Remove the two screws at the rear corners of the oven bottom panel. Using your finger tips press down on the front edge of the oven bottom to cause it to lift upward in the rear of the oven cavity. Lift the rear of the oven bottom upward and slide it toward the rear oven wall to disengage the front edge from the chassis. Remove the oven bottom. Before removing the bake element disconnect the element wires which can be accessed by removing the lower rear shield screws and slide the element assembly forward far enough to disconnect the wire terminals. Reverse the procedure to replace the element and install the oven bottom panel.