J.Moore for Model Number GSHL5KGXCCLS One of your chat personnel recommended main board part #AP4436216 for $143.67; was needed to solve this issue: the tope interior light bulb doesn't work inside the refrigerator side of my appliance. But when tested in another socket outside of unit, does function. The temperature for the refrigerator side of appliance registers at 84 degrees on door panel temperature board. I am unable to reset to a cooler number. The freezer side of the appliance works fine. How can I reset my refrigerator to a colder degree?
Answer J. Moore, Based on the information, the upper lights not working in the refrigerator section would most likely be caused by a faulty refrigerator light thermostat. If you remove the upper housing and pull it down there is a thermostat that is in between the light harness and the light itself. You will want to test this for continuity. If there is no continuity then the thermostat is bad and you will need to replace the light harness which is part number WR23X10493. For the touch display not allowing you to adjust the refrigerator temp, if the temp will adjust but will go back to the higher number then you will want to check the thermistor to make sure that it is reading correctly. If not then replace the thermistor. The resistance of the thermistor is 42.2K ohms at 0 degrees, 14.4K ohms at 37 degrees and 5K ohms at 77 degrees. If the temp display just will do nothing at all then the most likely cause would be a faulty display board. Read More... Answered by AppliancePartsPros.com | Friday, May 30, 2014