Customer Questions and Answers for Control Panel Assembly (Stainless Steel) by Ge

Hello Corlette. 1. Open the door. 2. Remove 2 Phillips-head screws from the top, front of the oven cabinet. 3. Remove 1 Phillips-head screw from the right, rear corner of the grill. 4. Slide grill to the left and remove. Remove the Phillips-head screw that attaches the control panel to the oven. Tilt the panel out and unplug the wires from the panel and remove ground screw. Disconnect the touch panel ribbon from the smart board. Remove the 3 Phillips-head screws that attach the smart board to the control board frame then lift the smart board off the frame.

Corlette, To remove the control panel you will remove the 2 screws holding the air grill in place and then once that is off there will be 1 screw holding the control panel in place. Remove the screw and lift the control panel off.