Customer Questions and Answers for Convertion Kit Asm by Ge

Mandy, You will need the burner tubing for the right rear WB28K10187, right front orifice holder WB28K10239, left front orifice holder WB28K10190, and left rear orifice holder WB28K10188. For the oven you would need to loosen the orifice by 1 1/2 to 2 turns and close the air shutter to about 3/4 way open. Flip cap on the regulator from LP to NAT.

Mandy, If the Nat Gas orifices weren't saved or got lost, etc. you will need to order and replace the orifice holders and tubes for the top burner : GAS RANGE REAR ORIFICE HOLDER WB28K10187 / WB28K10187 , FRONT ORIFICE HOLDER NG WB28K10239 / WB28K10239 , RANGE FRONT ORIFICE HOLDER WB28K10190 / WB28K10190 , RANGE BURNER SUPPLY TUBE, LEFT REAR, 9,500 BTUS WB28K10188 / WB28K10188. Then you can replace the orifices and tubes, or transfer the Nat Gas orifice from the tube and install them in the original burner base/holder. You will also need to adjust the oven and broil burner orifices turn them counterclockwise (up) 2 to 2 1/2 turns then "flip" the regulator cap back to the NAt Gas setting on the cap. Make sure you check for gas leaks before you put the range into service. Good Luck,