Customer Questions and Answers for Convertion Kit Asm by Ge

Harold, For the oven, you will loosen the orifices 1 1/2 to 2 turns and make sure that the air shutters are about 3/4 of the way open. For the surface burners, you will need to get the burner tubing for the right rear WB28K10187, left rear WB28K10188, Left front WB28K10190 and Right front WB28K10239. Also, do not forget to flip the cap on the pressure regulator from LP to Nat.

Yolette, the orifice hoods for the bake and broil burners would need to be loosened 1 1/2 to 2 full rotations and the air shutters closed to 3/4 of the airway being open.

J. B., In order to convert this unit back to natural gas you will need the orifice holders front right WB28K10239, front left WB28K10190, Right rear WB28K10187 and left rear WB28K10188. For the oven loosen the orifices 1 1/2 to 2 turns and close air shutters to about 3/4 way open. Flip the pin in the regulator under the cap to NAT.

Bett, you will need part number WB28K10558 to convert from natural to LP gas.

Mandy, You will need the burner tubing for the right rear WB28K10187, right front orifice holder WB28K10239, left front orifice holder WB28K10190, and left rear orifice holder WB28K10188. For the oven you would need to loosen the orifice by 1 1/2 to 2 turns and close the air shutter to about 3/4 way open. Flip cap on the regulator from LP to NAT.

Mandy, If the Nat Gas orifices weren't saved or got lost, etc. you will need to order and replace the orifice holders and tubes for the top burner : GAS RANGE REAR ORIFICE HOLDER WB28K10187 / WB28K10187 , FRONT ORIFICE HOLDER NG WB28K10239 / WB28K10239 , RANGE FRONT ORIFICE HOLDER WB28K10190 / WB28K10190 , RANGE BURNER SUPPLY TUBE, LEFT REAR, 9,500 BTUS WB28K10188 / WB28K10188. Then you can replace the orifices and tubes, or transfer the Nat Gas orifice from the tube and install them in the original burner base/holder. You will also need to adjust the oven and broil burner orifices turn them counterclockwise (up) 2 to 2 1/2 turns then "flip" the regulator cap back to the NAt Gas setting on the cap. Make sure you check for gas leaks before you put the range into service. Good Luck,

Steve, You will need the orifices large WB28K10029, 2 medium WB28K10022 and one small WB28K10023. For the oven you loosen the orifice on the bake and broil 1 1/2 to 2 turns and close the air shutter to the NG setting. You will then need to flip the cap on the regulator.

Theresa, In order to convert your unit back to NG you will need to get the orifice holders. The part numbers you need are Right rear WB28K10187, left rear WB28K10188, left front WB28K10190 and the right front WB28K10188. The oven you would loosen the orifices by 1 1/2 to 2 turns and close the air shutters on the burner to about 1/4 way open. Then flip the cap on the regulator.

Chad, To convert the bake and broil elements you would loosen the orifices on the control valve assembly by 1 1/2 to 2 turns and open the air shutters. You will also need to flip the regulator cap to natural.

Tony, The LP conversion kit part number is WB28K10558.