Customer Questions and Answers for Interface Disp Asm Bk by Ge

Alvin, you may want to check to ensure that the valve is receiving 120VAC when the dispenser is engaged. If it is receiving the voltage when the dispenser is engaged, then you may want to check if water will come through the line by removing the water line connector at the bottom of the door and running it into a bowl or cup while engaging the dispenser. If water comes through, then you may have a frozen water line which you can test the dispenser heater by going to the J4 connector on the display control and testing from pin 6 to pin 2 for 144 ohms. If the reading is not 144 ohms, then you have a bad dispenser heater. If water does not come out of the line when the dispenser is engaged, then you have either a bad valve, frozen water reservoir in the refrigerator section, or a bad filter (if the icemaker is producing low or no ice).