Customer Questions and Answers for Round Style Oven Or Broiler Igniter by Ge

Hello Gerald. Open or shorted sensor (circuit). Could be a result of contamination on terminals or pinched wire in sensor circuit, cold solder joint on control. • Disconnect power to range and remove sensor from oven (disconnect at connector block) • Measure sensor resistance at control connector (take care not to damage terminals in block) - Should read 1100W at room ambient (approx.72°F). Measure each sensor lead from connector block to ground. If shorted, look for pinched or cut wire in sensor circuit. • Check connector terminals - Look for deformed or corrosion on terminals. Repair or replace. • If all above is OK replace control.