Alanm for Model Number jgpb86web2ww The movie shows the repair person going to the back of the stove to detatch the old igniter and then to push the harness through a hole into the stove. My stove is in a tight space and it will be extremely difficult to pull out the stove. Can the old igniter be removed and the harness pushed through by going intothe front of the stove. Several users here seem to suggest that this is what they did but I am not certain they were referring to this igniter and my moder stove.
Answer Alan M., Your JGBP86WEB2WW range, may not be "exactly" the same as the range depicted in the video. Once you remove power to the range, remove the oven door, oven racks and oven bottom panel, You'll have a better idea. Then you can remove the flame spreader and go to work. The WB2X9154 / WB2X9154 RANGE OVEN IGNITER is a "kit" and comes with high temp. porcelain wire nuts. If you aren't able to access the connector or can't move the range. You can cut the connectors from the wires, measure the wires for a proper fit, and splice the two wires together using the wire nuts. be careful, the igniter is pretty fragile and can crack or break easily, once power is restored check the oven for ignition , heat, and operation. Read More... Answered by AppliancePartsPros.com | Thursday, November 1, 2018