Sam E. for Model Number LDF6810ST I am also having the fault code LE during the wash cycle. I have looked for broken wires and Ohmed out the white, blue and light blue wires going to the pump motor. Between the blue and light blue wires I read 16 ohms. Between the blue and white, reads open, between the light blue and white also reads open. These would be the three large pins on the motor. I have also read this at the motor after having removed the motor for access. On a new motor that you guys sale, what readings are you getting between the three large pins on the motor? I am not concerned about the four small pins that appear to be going to a hall effect sensor.
Answer Hello Sam, The service manual says to follow this procedure: 1. Check the wiring connections to the motor. 2. The Impeller of the Washing Pump is possibly locked. Correct the cause of the restriction OR Replace the Washing Motor. 3. The Blade is locked. Remove what is binding. 4. Replace the PCB. The motor replacement corrects the majority of these complaints. Read More... Answered by AppliancePartsPros.com | Friday, January 3, 2014