Randy for Model Number WM2016CW I just replaced the water discharge pump, but the new pump still will not turn on. The electrical schematic indicates the pump power is routed through the door latch from the PCB. The door latch symbol is shown on the display screen while the machine is washing. Which devise is likely to have failed ?
Answer Hello Randy. You need to check the pump connection. If it is good, then trace the wire and test and see where you losing voltage from. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, August 11, 2014