Bob for Model Number RS253BABB Hello, I have an automatic dispensing ice maker. It still makes ice, but won't dispense into the door. The motor doesn't switch on when I push the door actuator lever. What could be causing this? The water dispenser works fine, but not the ice. Thank you.
Answer Hi Bob. Do you see any definite fault codes ? A couple of things may affect this. First remove the ice bin assy. Then tape the freezer door switch shut. While the door is open put a glass into the ice paddle and call for ice, Is the auger motor part DA31-00105A turning at all ? Switch from cubes to crush and see if The crush solenoid plunger part DA74-40151G next to the auger motor goes up and down when you test it ? IF they do not then use a volt/ohm meter part # MA-DM1 to see if they get 120 vac while pressing for ice cubes or crush. This will tell you if the paddle switch part # DA34-00011B , fountain controls part # DA97-02828E and the wiring to the parts mentioned are ok. Use the supplied wiring diagram up in the controls or in the kick plate grill below to follow the circuits. Thank You. Read More... Answered by AppliancePartsPros.com | Thursday, May 3, 2012