Robert March 21, 2022 for Model Number RB195BSSB/XAA-00 Does the DA97-00258C head assembly go into the DA97-02203H to make up the full ice maker assembly? Previous Question: Problem description: ANSWER: Robert, The DA97-00258C is the icemaker assembly and the DA97-00258E is just the head. The head is not available as a separate part and you would need to get the assembly. Answered by AppliancePartsPros.com | Monday, March 21, 2022
1 Answer Hello Robert, the DA97-00258c is the ice maker assembly. DA97-02203H is the ice maker assembly with the attached support housing. Read More...
Wayne November 02, 2020 for Model Number RF4287HARS Hello, the ice maker stopped making ice and there is a sound every so often then kinda sounds like a pump is not primed. This lasts for a few minutes and stops. Then maybe hour or so the same cycle happens. Any suggestions?
1 Answer Wayne, This issue would most likely be caused by a faulty water valve on the unit that is not allowing water to pass through. Read More...
Tom August 25, 2020 for Model Number RS277ACBP/XAA-0000 My ice has been freezing into a clump, even just over a night. Ice ball cracked the ice bucket and there is ice on the shelf under it. The tray is not cracked. any thoughts.
1 Answer Check your water valve to see if it is leaking causing the excess ice to build up. Read More...
Jeff August 04, 2020 for Model Number RFG298AARS/XAA I took off the bottom Ice assembly and lost the screws. What screws do I need to attach it back on?
Peggy July 10, 2020 for Model Number RB195SSW/XAA Already replaced icemaker 2 times. a now the unit wont turn to empty ice sounds like something is stuck and going to break apart. Also the ice maker never stopped when full, but st]ll worked but made groaning noises
1 Answer Hello Peggy, what you are describing is a faulty ice maker, if you would recheck the model number and repost your question we will be able to locate the correct part for your model. Read More...
Leonard September 17, 2019 for Model Number RFG298AARS My freezer ice maker which has been removed allows water to flow into the upper drawer and then the water freezes. I have to remove the upper draw monthly to remove the ice sheets. I have the freezer ice maker turned off. Not sure what is happening. Leonard
1 Answer Leonard, based on the information provided, the issue would be that the water inlet valve DA97-07695A is leaking by and is causing the water to pass through. As a valve gets worn, parts of the valve can get to where it does not close fully. Read More...
Jon August 13, 2019 for Model Number RB215LASH Hello My ice maker had an issue, the water kept pouring into the ice tray, and will not stop. It seems like the sensor that makes water auto stop, stop working? Is it best to buy a new ice alter assembly and replace the complete unit? Thank you Jon
1 Answer Jon, you may want to inspect the valve DA62-00930A to see if there is a humming noise coming from it. This humming noise is the valve being energized and if it is not humming then the valve has failed and is letting water pass. If the valve is being energized, the most likely issue would be the main control and it can be tested. The first step will be to test the main pcb MICOM #31 for +5V output, IC70 #18 for 0V output, and then with the unit unplugged the relay K76 will need to be inspected for any visible defects. If any of these fail, the main control DA41-00293A would need to be replaced. If the main control tests good, then there would be an issue with the ice maker DA97-02203H that would be causing the main control to sense a continuous harvest. Read More...
Jam May 08, 2019 for Model Number Samsung RB195BSSW I would like to purchase a complete icemaker assembly for my Samsung model RB195BSSW Refrigerator. Every time I visit a parts site, and do a model check...I get an "incompatible" warning. Please direct me to the correct model icemaker. Thanks !!!
1 Answer Jam, The icemaker that would work for your unit will be part number DA97-02203H. It may not show as compatible but is the correct part. Read More...
Rupert February 19, 2019 for Model Number DA97-07365G I have a GE refrigerator with a Samsung ice maker DA97-07365G, I acquired the refrigerator from a friend who had the ice maker and water dispenser working. It sat in my garage for about 3 months before I installed it in our kitchen. The water dispenser works but we get no ice at all. I pushed the reset button but all that flows out is water once the cycle is complete. I wanted to know if the ice maker needs to be replaced or another part. I had the refrigerator hooked up for about 2 weeks before I installed the water line. Unfortunately I did not know I should have put the ice maker into ice off mode. Any help you could give would be great as well as a link to parts I might need.
1 Answer Rupert, When you manually cycle the ice maker and it fills as the cycle ends that is normal operation. When you check the ice maker a couple hours later there should be ice in the mold waiting to be ejected on the next cycle. If all of this is correct then you might have a cooling issue. The freezer must be close to 0 degrees for the ice maker to cycle on its own. So check fan operation for evaporator and condenser and make sure the condenser itself is clean. Read More...
David L. June 02, 2018 for Model Number da97-07365a icemaker I'm looking for just the turn gear. Lost a couple of teeth. is it possible to get just the gear? Thank you
1 Answer Hello David, I'm sorry but the manufacturer has not made individual parts for the DA97-02203H icemaker available. Thank you for your patience and understanding in this matter. Read More...