Juan Doh for Model Number Samsung Dryer DV350AEW Dryer dies repeatedly in Mid Cycle. After dying, when I restart the machine - the LED display only lights up about half way. The lights are dim and the bell ding is weak. If I wait just a bit - it will fully power back on - but within a few minutes of running - the display starts flickering on and off; and the machine dies. I have tested the: heating coil, thermal fuse, and thermostat - all had continuity. I went ahead and replaced them anyways since I already had the parts. The dyer continued suffering the same symptoms. Since this seems like it'd obviously be a power issue - I also checked the wall outlet for power; got both the 120 & 240v readings. And I checked the plug wire connections; which also tested fine; along with checking the breaker. I'm assuming (by process of elimination) the culprit is either the Main Power Control Board or the User Control Board? I've also read that motor dying can cause similar symptoms - but they weren't quite similar enough plus the drum starts strong and turns just fine every time it's first turned on. Am I looking in the wrong direction? Any help would be greatly appreciated. Thanks in advance!
Answer Juan, This issue would most likely be caused by the main control board DC92-00382A on the unit. You will want to check wiring between main board and user interface but the main board will be most likely cause. Read More... Answered by AppliancePartsPros.com | Thursday, June 28, 2018