Abhay for Model Number SGM364S Hi, My Stove Igniter has some problem. Even if all burners are off it still keep continuous spark until I turn on all 4 gas burner. I have unplugged igniter and currently using manual lighter to turn on gas (it works fine). If I try to plug in igniter cable, it keep spark all 4 burners even all 4 burners are turn off. Also couldn't find any video for replacing spark module for this particular model (similar to this). Please advise. Thanks, Abhay
Answer Abhay, Check to make sure the power to the cooktop is a properly polarized, grounded, 120 VAC outlet. Remove power to the cooktop and shut off the gas supply. Remove the burner grates, caps and knobs. Using the special; tool 86007C remove the burner orifice rings(you may want to mark or label the burner parts for location on the cooktop, it may make it easier for you when you replace the parts. Once you have everything removed and loose, raise the cooktop, and prop it up with a wooden dowel. Remove the foil covered insulation to access the spark module. Your machine has a "re ignition" spark module DE81-03927A / 86527, so you will need to check and verify the correct wiring at the module connections before you reconstruct the cooktop. Read More... Answered by AppliancePartsPros.com | Monday, February 12, 2018