Adrian D. for Model Number JJW8527CAS I have verified the model number JJW8527CAS. After I changed the clock the first time which I ordered myself from Sears Parts the display worked but the oven did not. I called in a repair person from Sears Service. We assumed the new control panel was bad and ordered another one. All of the replacement panels were clearly not new even though they were supposed to be. The third replacement clock was ordered from a different source and again it was NOT new and it had exactly the same problem. Again the display works with the replacement clocks but when you set the oven for Broil it starts to heat the broil element and the fan comes on but as soon as you open the door it shuts down. I understand that the color of the PC board does not make any difference but the component layout is completely different from the original board. And again when the old panel is reinstalled the oven works just fine but of course with no display. The repair technician, from Sears, gave up on the problem and suggested I try to get a replacemnet panel locally. Morgan and White thinking that Sears Parts was lacking the proper information on the replacement part. When I look at the one on your site and display the component side I can see that it is the same as all of the replacement panels I have already tried. The serial number on my oven is 12529752CA and I am wondering if there was a different panel for this particular vintage. It has been a great oven and I hate to give it up because of a faulty display and an inability to get a proper replacement. I also wonder if it is possible to have the original panel repaired to restore the display. Adrian
Answer Hello Adrian. Based on the model number you provided, WP71003424 is the correct oven control board. Based on the information you provided, it sounds like the relay board 74006612 may be bad and will need to be replaced. Hope this helps. Read More... Answered by AppliancePartsPros.com | Monday, November 21, 2011