George for Model Number DU1145XTPQ9 Whirlpool I have a Whirlpool dishwasher model DU1145XTPQ9 There is glass visible below the lower arm in the accumulator. I've removed the lower arm and the screws to the top of the accumulator. Now what? The top of the accumulator looks like it might twist off but what the water feed arm.
Answer Hello George, The feed tube will twist out of the way. The internal rear feed cap rotates to the right to about the 2 o'clock position to be removed. The feed tube can also be removed from the clips in the rear if so desired. Once the internal rear feed cap is removed, remove the screws and the accumulator assembly and you will have access to the chopper blade area of the pump. Be sure to check the chopper blade shaft for breakage. If a piece of glass gets into the chopper blade, it will break the shaft that supports it and will make noises and food particles will accumulate in the pump. This will cause a no drain situation. Be sure to let us know if any more assistance is required. Read More... Answered by AppliancePartsPros.com | Wednesday, May 23, 2012