Customer Questions and Answers for Dryer Belt by Whirlpool

Robert, To access the belt, there is a service panel at the bottom of the front. You will first need to disconnect the power supply. Remove the screws at the bottom of the panel. Lift the bottom of the panel outward to release the spring clips and panel locators. Remove the screws holding the front panel located at the bottom of the panel and lift the bottom of the front panel outward to release from top panel. You will need to lift the main top by removing the screws securing the cabinet top to the side panels. When you disconnect the door switch make sure that you mark the wires to ensure that you know how they are connected or take a picture of how they are connected. You will then remove 4 screws holding the front bulkhead assembly. This will allow you to take the belt off.