Customer Questions and Answers for Clock/Overlay (Blk) by Whirlpool

Hello Starr. You you will need to pull out the range. 1. Open or remove oven door from unit. 2. Remove control knobs from gas valves, by pulling. 3. Remove screws securing front control panel, located on the bottom edge of the front control panel. 4. Remove control panel by sliding one way or the other and pulling away from the unit. 1. Turn power off to unit. 3. Remove grates and caps. 4. Remove screws securing top surface burner to maintop. 5. Lift surface burner off. 6. Raise the front edge of the maintop and pull forward. 7. Lift maintop assembly from the oven chassis. 2. Remove screws securing control panel heat shield. 3. Remove screws securing bottom outside edges of the control panel. 4. Pull unit out from the wall far enough to allow the back outside screws to be loosened. 5. Loosen the back outside screws securing control panel to backguard. 6. Grasp front lower outside edges of the control panel and push inward on the outside edges of the backguard to release the control panel front. 2. Remove screws securing control board bracket to control panel. 3. Label and disconnect terminal plug from control board assembly. 4. Reverse procedure to reinstall control board assembly WP74009217. Hope this helps.