Tim H. for Model Number WFW9300VU02 I had an F71 error on the display I disconnected the main power supply and now washer will not power up. There is 3 short beeps when the power button is pressed, but nothing happens. The control lock will illuminate after holding it down for 3 seconds. The drum will spin and from some research this indicates the CCU is not the problem and was suggested the user interface is. There are 2 user interfaces a center and a right am I to assume that since the machine will not power up the problem is the center interface or is there a way to test where the fault is. I am thinking that because the control lock works there is power to the center board but a break between it and the right and the ccu sound reasonable?
Answer Hello Tim. Based on the information you provided, it sounds like the user interface boards are bad. The manufacture recommends changing both boards W10319816 for this problem. Hope this helps. Read More... Answered by AppliancePartsPros.com | Monday, June 20, 2011