Matt C for Model Number VCSF036DSS Viking Found instructions below. My code is 1410 so would that be 14 on freezer and 10 on refrigerator or 14 on Fridge and 10 on Refrigerator side? 1. Open the Fresh Food door and press and hold the Door Alarm Keypad Door Alarm . 2. Press and hold Freezer Temperature Down Keypad . 3. Release the Door Alarm Keypad Door Alarm and wait 3 seconds. 4. The control will display PE to indicate the programming mode. 5. Entry is confirmed by pressing the Freezer Temperature Down Keypad once more. 6. The control will display the current Program CODE. This value should be validated with the Program CODE printed on the unit serial plate. PE0 Fast Ice Reset Filter Vacation Mode Temp Alert Door Alarm Max Cool Freezer Order Replace Refrigerator 000 NOTE: If the Program CODE is correct, the Programming Mode is exited by closing the Refrigerator door(s). 7. Press the Refrigerator Temperature UP Keypad or Refrigerator Down Keypad to change the digit value with each key press. 8. The decimal point indicates the selected digit. Press the Freezer Temperature UP Keypad to select the next digit. 9. Once the desired Program CODE is entered, press and hold the Freezer Temperature DOWN Keypad until the Program CODE begins flashing indicating it has been saved. NOTE: If you attempt to enter an invalid Program CODE the control will not save the new code, but will beep. (The unit will NOT run with a Program CODE of 0000).Once the Program CODE has been saved the Programming Mode is exited by closing the Refrigerator door(s). If the new code is incorrect this process should be repeated after closing the Refrigerator door(s)
Answer Matt, When programming the control board it would be 14 on the freezer side and 10 on the refrigerator side. Read More... Answered by AppliancePartsPros.com | Tuesday, July 27, 2021