Sunny H for Model Number GBD307PDQ10 I have a whirlpool double oven (Model: GBD307PDQ10). The control panel display was getting dimmer for the past six months. Eventually the control panel display died altogether and no digits are displayed any longer. Once the control panel display died, The oven also stopped functioning. There is still power getting to the oven in that the internal oven lights turn on but if you try to turn on the oven it beeps once takes a pause and then beeps four or five other times (I don't remember whether it's four or five). If I turn off power to the oven (turn off the house breaker) and then turn it back on, the oven works for about 10 seconds and then beeps once followed by four or five other beeps and does not work thereafter. Any ideas on what the fix is?
Answer Sunny, You will want to access the control board and check for 120 vac between the P16 pin 5 and 7 connector and check for 12 to 24 vdc on the P16 pin 2 to 3 connector. This will measure voltage into the control transformer and out. It sounds like this would be the issue. If there is 120 vac coming from pins 5 to 7 but nothing on 2 to 3 then the transformer needs to be replaced. The part number of the transformer is WP9760587. If the voltages check ok then the issue would be the control board WPW10438751. Read More... Answered by AppliancePartsPros.com | Friday, September 26, 2014