Steve K for Model Number WGD9500TW1 I have a Whirlpool gas Duet Steam Dryer (part number WGD9500TW1). I suspect it is about 6 or 7 years old. Everything on it works except recently, the heat went out. I checked the breaker, cleaned the vent and exhaust hose and no luck. Did diagnostic and came up with an F:01 code. This is the control board (part number W10182365 Rev B). Seems strange that a bad control board is the reason for no heat. I took cover off and checked every connection on the board and reconnected them to no avail. I am worried that I will purchase a new control board for $210 and after installing it, the heat still won't work. Does it make sense that I would get an F:01 code for no heat when literally everything else on the dryer is working perfectly? Would you recommend replacing the control board to bring back the heat? Thanks.
Answer Steve, There is a heat relay on the control board that would be the cause of this issue and the F01 error is a control failure in which you would need to replace the control board for. Read More... Answered by AppliancePartsPros.com | Tuesday, July 25, 2017