Customer Questions and Answers for Cooktop (Blk) by Whirlpool

Mike, here is the information from the manufacturer. Thanks. 1. Turn off the electrical supply to the range. 2. Open the oven door and remove the screws from under the front of the maintop, then close the oven door. 3. Slide the maintop forward as far as possible and remove the ground wire and main harness strain relief from the rear of the maintop. 4. Lay a protective covering between the maintop and the range to protect the finish, then turn the maintop over and lay it on the covering so that you can access the components. 5. Remove the two screws from the bracket of the hot surface indicator light. 6. Remove the screws from the element retaining brackets, unhook them from the maintop, and remove them. 7. Clean the bottom glass of the new maintop and remove any debris. 8. Lift the elements off the old maintop and place them on the new maintop at the same locations. 9. Install the new maintop and reassemble the range. REASSEMBLY NOTE: When reinstalling the maintop, make sure that it is centered on the range, that the side brackets are engaged, and that the rear side flanges are inside the end caps.