Customer Questions and Answers for Rear Oven Door Glass by Whirlpool

John, Here's some basic information for the oven door repairs : "CAUTION: When you work on the double oven, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful. 1. Remove the oven door from the oven . 2. Place the oven door on a padded work surface with the front decorative glass facing down. 3. Remove the two top door liner screws and the two door glass bracket screws, and lift the liner assembly off the decorative door glass and handle. 4. To remove the outer door glass: a) Remove the three outer glass holder screws and two outer glass bracket screws from the door liner. b) Lift the outer glass with the glass holder off the door liner. c) Remove the bracket. 5. To remove the center door glass, remove the bottom bracket, (it is loose), and slide the two top corners of the glass out of the door liner slots. 6. To remove the hinges and the inner door glass: NOTE: You will have to remove both hinges to remove the inner door glass from the oven door liner. a) Lift either side of the door liner, remove the two door hinge screws, and remove the hinge. b) Lift the other side of the door liner, remove the two screws for the other hinge, and remove the hinge. c) Lift the inner door glass liner cover off the liner. d) Remove the insulation and the inner door glass. 7. To remove the door handle, remove the two door handle screws from the bracket. To remove the oven door: 1. Install a pin in the hole of each oven door hinge hanger.2. Close the oven door as far as the two pins will allow. 3. Grasp the sides of the door and lift the door until it stops, then pull the hinge hangers out of the slots. " Thanks and Good Luck