Chris for Model Number RBS305PDB16 Replaced the inner glass without a problem and completed putting the door back together, but having trouble attaching the door/hinges back to the oven. Got the hing hangers on, but can't get it past the next bump/stopper. Any suggestions?
Answer Ksam, You will need to check a few circuits at the timer and water temp. switch, with a multimeter. At the timer, you'll need to unplug the power cord, select the rinse cycle and pull out the timer knob, You should read a "closed" circuit between SW (blk) and 5B (blu) ibn the rinse setting on all three cycles. At the water temperature switch with any "cold" rinse setting You should read a "closed" circuit between terminals 7T (wht) and 3 (ylw) and 7T (wht) and 4(orng). You also want to disconnect the air tube from the water level switch and make sure it is not clogged with debris, by blowing in it. Here's some meter usage information, should you need it [http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html] Read More... Answered by AppliancePartsPros.com | Tuesday, July 17, 2012