Nazir A for Model Number MSD2756GEB I have frost built up on the evap coil,suspecting defrost heater not working properly,checked ohm value was 204 OHM,My question is what is the right ohm value should be,is this 204 ohm is good or bad,please email me,so that i can find the right fix.
Answer Hello Nazir. You need to test the heater and the thermostat for continuity. Should read closed when cold. If so, the timer will need to be replaced on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, July 19, 2012