Customer Questions and Answers for Range Surface Burner Igniter by Whirlpool

Charles, Here'some basic information: " ELECTRICAL SHOCK HAZARD Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock. Shut off gas supply line valve before servicing the range. Check all gas line connections and replace all panels before operating the range. Failure to do so could result in explosion, fire, or other injury. 1. Turn off the gas and electrical power going to the range. 2. Remove the grates and keep-warm rack from the cooktop. 3. Lift the four burner caps and burner bases off the burners and the spark ignitors. 4. Remove the mounting screw from each of the four burners. 5. Lift the front of the cooktop and unsnap it from the two clips, then raise the cooktop and prop it up. 3. To remove a spark ignitor: a)Disconnect the ignitor wire from the spark module. b)Push the ignitor and clip out of the cooktop mounting hole. NOTE: You may have to squeeze the ignitor clip together at the gap to remove the ignitor from the mounting hole." Good Luck and Thanks