Customer Questions and Answers for Inf Switch Kit ( Dual ) by Whirlpool

Denny, The following is the instructions for your switch. 1. Double RED: N -> P2 (incoming power, Line 1) 2. Single RED: N -> 2 (to Inner AND Outer heating elements common wire) 3. Single BLK: L1 -> P1 (incoming power, Line 2) 4. Single TAN: H1 -> 4 (to the Inner heating element) 5. Single YEL: H2-> 4a (to the Inner heating element) 6. Single BLK: P -> S2 (to the R.F. indicator control light) 7. Attach jumper black wire (included with new switch) from P1 (P1 has two connectors close together) to S1. *On units with a compound connection, the two red wires must be separated. Locate the right front switch connection (L2). The red wire routed from the right rear element/switch will remain, but the red wire routed from the left rear element/switch must be disconnected, re-terminated and connected to position 2 on the new dual switch. *On units with an L2 piggyback connection, the two red wires must be separated. Locate the red wire routed to the L2 supply and connect it to position P2 on the new dual switch. Locate the red wire routed to the element and connect it to position 2 on the new dual switch. *On all other applications, the wire connected to the element should terminate to position 2 on the new dual switch