David for Model Number CVE3400W I ordered a switch for my dual LR element on my Jenn-Air downdraft ceramic top stove. I was sent a WP repair part #12002125 to replace original. It is smaller and the wiring hookups are different. I found a schematic of the original electric wiring and using that I positioned the wires to the new switch. When I turned the power back on the burner would not work. Instruction sheet said to separate red power wires and connect the one marked L2 to terminal 2 on new switch. Did that and dual element works great but none of the others work now and the heat indicator light stays on for that burner. There were other instructions about a piggyback connection but I am unsure what that is and the wires they talk about are not the same in my application. Help please.
Answer David, For this model you would separate the 2 wires that were connected to L2 and you will want to locate which one will go back to the L2 supply. This wire that goes back to the L2 supply will connect to the P2 on the new switch and the other will connect to terminal 2. The one connected to terminal 2 should lead to the other switches. Read More... Answered by AppliancePartsPros.com | Thursday, August 31, 2017