Ac for Model Number Maytag Washing Machine Model MTW5770TQ0 New machine only 2yr old? NO Cold Water? supplied at any part of cycle? It works fine. We manually fill it with hot water. disconnected from the back. I am no expert but I removed the cover, and the Water vlv measure .787 KOhms on the bottom Solennoid which is the HOT one AND .8 KOhms on the COLD? but there is NO continuity in any of these? There is another two connectors for the mixing going inside the machine this gets 51.5 KOhms and again there is NO continuity? Is the Water Mixing Valve 3979346 Bad? How come I only get COLD water? Is could be the Temperature Switch? I thank You very Much.
Answer Hello Ac. If there is power to the valve, and the screens are clear, but there is no water, youwill need to order and replace the water valve on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, March 25, 2013