Michel for Model Number WTW8200YW0 It just recently started overfilling the dispensers -soap, fabric softener and bleach - they overfill and dump it over the side which ends up dripping down the outside of the tub. It seems to start filling the dispenser normally and then it's like the pressure raises and it's just too much for the dispensers capacity. It started doing it just to the fabric softener and now it's all three.I made a manual diagnostic test on the log valve and all 6 solenoids operate properly on command and the dispensers still overfill if I dont command the valve to shut. Otherwise, it operates normally, is it possible the log valve feeds more water then normal or something is wrong with the dispensers.
Answer Michel, You will want to check the dispenser to ensure that there is no clogging in the dispenser. This would be the most likely cause for the issue to occur. If there are no clogs then it is possible that the valve is causing the issue but would suspect the dispenser. Read More... Answered by AppliancePartsPros.com | Wednesday, August 5, 2015