Ben for Model Number MAV7600AWW Got 2 issues. The main issue is that the washer has begun to lurch when it spins to a stop. Literally jumps 2-3 inches sideways at the end of cycles. It's been squeaking to a stop for a long while but that was an inconvenience, this new issue has to be addressed. I've read something about applying silicone brake grease to brake rotor or brake pads but on my model, I believe those are not accessible unless I dismantle the entire washer to get at the sealed brake assembly at the bottom of my tub. I don't know if trying lube first is recommended but what parts do I need to replace and what is the recommended procedure to remove the brake assembly. Do I replace 2 of the 6 bolts with 5/16" screws to hold the tension while I release the assembly? Other issue is that periodically the water will not have drained out of the tub at the end of the wash cycle. thanks
Answer Ben, This would be an issue with the brakes on the unit. The parts you would want would be the brake stator WP35-6918 and the brake lining WP35-6714. For the draining issue check the pump to make sure that it is not seizing up and not clogged. Read More... Answered by AppliancePartsPros.com | Tuesday, January 16, 2018